This package provides Remote Access Host Card Driver For FX100 is supported on Precision R5x00 Series, Tx600 Series and FX100 running the following Windows Operating systems: NA.

Fixes: - Fixed problem where Portal devices could not connect to VMware View Connection Server 3.1 - Modified the algorithm that reorders imaging packets. The changes improve the performance of sessions operating over low bandwidth links that experience small imaging changes such as mouse movements - Fixed problem where PCoIP sessions operated across a firewall were being dropped because the firewall was closing ports that were idle for 5 or more minutes. - Fixed problem where the Portal monitor was not turned off when the operating system attempted to turn it off - Fixed problem where the OSD Password reset feature failed to work properly Enhancements: - Added support for advertising default EDID information when no monitor is detected - Added support to display the PCoIP logo on the web browser path bar when connected to web server of a PCoIP device. - Modified the VMware View web and the OSD interfaces such that the default port number is used when the field is left blank. - Addedsupport to display an overlay when no PCoIP traffic is received for 2 or more seconds. - Added support to report PCoIP Host network link status and session statistics to the PCoIP Host Software - Modified the format of the magic packet, which is sent by a Portal when it attempts to wake a Host that is in a low power state. The new formats allow Portals to wake Hosts located on different subnets.