Dell Support Drivers & Downloads Driver File Formats

Driver Details

USI Remote Access Host Card Driver
This package provides Remote Access Host Card Driver For FX100 is supported on Precision R5x00 Series, Tx600 Series and FX100 running the following Windows Operating systems: NA.
Release Date 6/19/2012
Importance: Recommended
Version: tera1x00_rel2-2_v223.all,A08

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:


Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 3MB

Previous Versions

No previous version available.


This package provides Remote Access Host Card Driver For FX100 is supported on Precision R5x00 Series, Tx600 Series and FX100 running the following Windows Operating systems: NA.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).


External OEMR R5500
External OEMR XL R5500
External T3600 XL
Precision R5400
Precision T3600
Precision T5600
Precision T7600
Operating Systems
Not Applicable

Applies to

  • Remote Access Host Card For FX100
  • TSH,FW3.0,FX100

Fixes & Enhancements

Fixes: - Fixed problem where Portal devices could not connect to VMware View Connection Server 3.1 - Modified the algorithm that reorders imaging packets. The changes improve the performance of sessions operating over low bandwidth links that experience small imaging changes such as mouse movements - Fixed problem where PCoIP sessions operated across a firewall were being dropped because the firewall was closing ports that were idle for 5 or more minutes. - Fixed problem where the Portal monitor was not turned off when the operating system attempted to turn it off - Fixed problem where the OSD Password reset feature failed to work properly Enhancements: - Added support for advertising default EDID information when no monitor is detected - Added support to display the PCoIP logo on the web browser path bar when connected to web server of a PCoIP device. - Modified the VMware View web and the OSD interfaces such that the default port number is used when the field is left blank. - Addedsupport to display an overlay when no PCoIP traffic is received for 2 or more seconds. - Added support to report PCoIP Host network link status and session statistics to the PCoIP Host Software - Modified the format of the magic packet, which is sent by a Portal when it attempts to wake a Host that is in a low power state. The new formats allow Portals to wake Hosts located on different subnets.

Installation instructions

Hard Drive Installation (Winzip self-extractor) Instructions
1.Click Download now, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.

1. Browse to the location where you downloaded the file and double-click the new file.
2.The Self-Extracting window appears and prompts you extracting files  to the dialog box indicated folder path (C:\DELL\DRIVERS\xxxxx). Write down this path so the executable (I.e.Setup.exe) file can be found later for reinstallation if needed.
3. The Self-Extractor window appears.
4. Click OK.
5. Follow the remaining prompts to perform the update.            


To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.

By downloading, you accept the terms of the Dell Software License Agreement.