Custom Instructions for TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE:

Download

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to disk and click OK. The Save In: window appears. 
3.From the Save In: field, click the down arrow then click to select Desktop and click Save.  The file will download to your desktop.
4.If the Download Complete window appears, click Close.  The file icon appears on your desktop.

Install (Windows XP and Vista Users)

1.Save all work and be prepared to reboot the system after flashing the drive. Double-click the new icon on the desktop labeled TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE.
2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R201947. Write down this path so the executable (i.e. Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor window is still open, close it.
6.The Windows Flash utility, SFDNWIN, for the TSST TS-H493B drive will automatically launch.
7.If a "Drive not found" message pops up, then the system is not detecting the TSST TS-H493B drive. Check to make sure the TSST TS-H493B drive is properly installed.
8.The SFDNWIN flash utility window will appear. Click on the round folder icon on the extreme top left corner of the SFDNWIN window.
9.Navigate to the folder C:\DELL\DRIVERS\R201947
10.Select 493BD400.BIN
11.Click on the "Flash to Drive" icon next to the folder icon on the top left of the SFDNWIN window. (It is the 2nd of the three icons on the top left of the SFDNWIN window)
12.Wait for the flash process to complete.
13.Acknowledge reboot request to reboot system.

Install (DOS Users)

1.Double-click the new icon on the desktop labeled TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE.
2.The Self-Extracting window appears and prompts you to extract or 
unzip to C:\DELL\DRIVERS\R201947. Write down this path so the executable (I.e. 
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor window is still open, close it.
6.The Windows Flash utility, SFDNWIN, for the TSST TS-H493B drive will automatically launch. Close the SFDNWIN. On other OSes, the SFDNWIN utility may fail to launch.
7.Navigate to the folder C:\DELL\DRIVERS\R201947\DOS
8.Copy the files "SFDNDOS.EXE" and "493BD400.BIN" to a bootable DOS floppy or flash disk.
9.Boot to DOS
10.Navigate to the location where "SFDNDOS.EXE" and "493BD400.BIN" are located on the DOS floppy or Flash disk.
11.Enter "SFDNDOS 493BD400.BIN" at the DOS prompt.
12.Follow the instructions to complete the flash process and reboot after flash process is complete.