Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update
This package provides the Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update and is supported on Alienware, Inspiron, Latitude, XPS Notebook, OptiPlex, Precision and Vostro Notebook models that are running the following Windows Operating Systems: Windows 7 and Windows 8.
Release Date 3/11/2013
Importance: Optional
Version: 040H,A00-00

The following formats are available for the file you have selected

File Format: Download File Download File
File Name:

Micron C400 7MM 040H.zip

Description:
Download Type: HTTP
File Size: 1MB

Previous Versions

No previous version available.

Description

This package provides the Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update and is supported on Alienware, Inspiron, Latitude, XPS Notebook, OptiPlex, Precision and Vostro Notebook models that are running the following Windows Operating Systems: Windows 7 and Windows 8.

Level of Importance:Optional

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Important Information

1. Equipment needed, a CD drive, a blank CD. 2. Do not POWER OFF the system during the firmware update procedure. 3. Please perform a full system backup before starting the firmware update procedure (highly recommended). 4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended). 5.The firmware utility tool is OS independent.

Compatibility

Systems
Alienware Aurora R4
Alienware M11x R3
Alienware M14x
Alienware M14x R2
Alienware M17x R4
Alienware M18x
Alienware M18x R2
External T3600 XL
External T5600 XL
External XL 9010
Inspiron 13z (N311Z)
Inspiron 14Z 5423
Inspiron 15Z 5523
Latitude 2120
Latitude E5430
Latitude E5530
Latitude E6220
Latitude E6420 XFR
Latitude XT3
OptiPlex 7010
OptiPlex 790
OptiPlex 9010
OptiPlex 990
OptiPlex XE
Precision M4700
Precision M6700
Precision R5500
Precision T1600
Precision T1650
Precision T3500
Precision T3600
Precision T5500
Precision T5600
Precision T7500
Precision T7600
Vostro 3350
Vostro 3360
Vostro 3450
Vostro 3460
Vostro 3550
Vostro 3750
Vostro V131
XPS 14 (L421X, Mid 2012)
XPS 14Z (L412Z, Late 2011)
XPS 15 (L521X, Mid 2012)
XPS 15Z (L511Z, Mid 2011)
XPS 17 (L702X, Early 2011)
Operating Systems
MS Windows 7 32-bit
MS Windows 7 64-bit
MS Windows 8 32-bit
MS Windows 8 64-bit

Applies to

  • Micron RealSSD C400

Fixes & Enhancements

Fixes - Fixed issues where SSD may not be detected after a previous forced power cycle. Enhancements - Enhanced the device ready time, allowing system to be able to power up quickly.

Installation instructions

            
Backup
1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure.

Download and image extraction
1. Click Download File to download the zipped file.
2. Extract the file into a folder.
3. The ISO image file is used to burn the utility onto a bootable CD.

Installation
1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended).
2. DO NOT remove power from the system during the firmware update process.
3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode.
4. Ensure that your BIOS boot order has been set up to boot from CD drive
  a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from
  b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting.
5. Insert the bootable CD media with ISO image into your system.
6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically.
7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen.
8. Select Yes to the request 'Update firmware on this drive?'
9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete.
10. Upon completion, the message 'Current Firmware is: 040H' will be displayed.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
8c093ee80739f53404219cbf429f8f35
Micron C400 7MM 040H.zip
SHA1:
c4270268c05b006f6c8e7a3e2bca74a1300bc7c7
Micron C400 7MM 040H.zip
SHA-256:
8c5339f143d75bac4c397153a4558628754a43d44472fe734adfaf6e27598938
Micron C400 7MM 040H.zip

By downloading, you accept the terms of the Dell Software License Agreement.