Dell 32 Bit Diagnostics (Graphical User Interface version), A1264
Dell 32-bit Diagnostics v1264
The following formats are available for the file you have selected
|File Format:||ISO Image||
|Description:||This file contains an ISO image used to create a CDROM. Download the file to a folder on your hard drive, then create a CD using your preferred CD burning software.|
<ul><li><b>Dell Version :</b> A1260</li></ul>
|11/10/2005 2:34:46 PM|
Dell 32-bit Diagnostics v1264
Level of Importance:Optional
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.
If a system has more than 4GB of memory installed, the configuration data display for the memory module will not report the memory size properly.
|Systems Inspiron 1300 Inspiron 6000 Inspiron 630m Inspiron 6400 Inspiron 640M Inspiron 9400 Inspiron B130 Inspiron E1405 Inspiron E1505 Inspiron E1705 Latitude 110L Latitude 120L Latitude D410 Latitude D510 Latitude D520 Latitude D610 Latitude D620 Latitude D810 Latitude X1 Precision M20 Precision M70 XPS M140 XPS M1710||Operating Systems Not Applicable|
- 32 Bit Diagnostics (Graphical User Interface version)
Fixes & Enhancements
DellDiag.exe has been enhanced to support new systems.
Custom Instructions for CZ126400.exe: Hard Drive Installation using CZ126400.exe Download 1. Select the download method you want to use to retrieve the file - either HTTP or FTP. 2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement. 3. When the File Download window appears, click Save this program to disk and click OK. The Save In window appears. 4. From the Save In drop-down menu click to select Desktop and then click Save. The file will download to your desktop. 5. If a Download Complete window appears, click Close. A new icon appears on your desktop. Install 1. Double-click the new icon on the desktop labeled CZ126400.exe. 2. When the Self-Extractor window appears, click Continue. 3. A dialog box will prompt you for the directory to unzip the files to. Normally you should leave the default path. This path must be on an MS-DOS FAT partition. If you extract the files to any other type of partition (for example NTFS) you will not be able to run the diagnostics. Write down the path where the files were placed. 4. Click OK. 5. If you get a prompt asking you if you would like to create the directory, click YES. 6. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer. Running the Diagnostics from a Hard Drive 1. In order to run the diagnostics you must boot to an MS-DOS prompt. If necessary create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 - "What can I use for a boot disk with CD-ROM support?" 2. Insert the diskette into the diskette drive and reboot the computer. 3. At the A:/> prompt, type "C:" (or the drive letter where you saved the diagnostics to) and then press the [ENTER] key. 4. Type "cd c:\dell\drivers\Rxxxx" (or the path that you specified above) and then press [ENTER]. 5. Type "Delldiag" and then press [ENTER] to run the diagnostics. 6. Follow the on-screen instructions. Instructions for cdd_1264.ISO: NOTE: In order to use this file, you need a CD-R or CD-RW and appropriate software to create a CD from the downloaded image Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive. Installation 1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
By downloading, you accept the terms of the Dell Software License Agreement.