Dell Rack KVM 2161DS Digital Switch Version 2, Rack KVM 4161DS Digital Switch, v.1.2.3.1, A01
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Dell 2161DS-2 and 4162DS KVM Firmware Update (A01) for OBWI Support
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Features and Enhancements:
- OBWI (On-Board Web Interface)
Read More- OBWI (On-Board Web Interface)
Version
1.2.3.1, A01
Release date
07 May 2013
Download Type
Firmware
Category
Rack Solutions
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: ZipPack External
File Name: DELL_MULTI-DEVICE_A01_R177223.exe
File Size: 9.96 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This firmware is meant for use only on 2161DS-2 and 4162DS systems. It is not compatible with legacy 2161DS systems. For LDAP support on legacy 2161DS systems, please use the appropriate firmware available at support.dell.com.
Supported Operating Systems
Red Hat® Ent Linux 2.1
Red Hat® Ent Linux 3
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Novell Netware
Windows Server 2003
Windows 2000
Applies to
Rack KVM 2161DS Digital Switch Version 2
Rack KVM 4161DS Digital Switch
Installation instructions
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Upgrading Firmware Using a Serial Console
To upload a new FLASH file to the 2161DS Console Switch:
1. Connect a terminal or PC running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the 2161DS Console Switch using the supplied serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow
control.
2. If the 2161DS Console Switch is not powered up, turn it on now. The Power indicator on the front of the unit will blink for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the ENTER key to access the main menu.
3. You will see the Terminal Applications menu with seven options. Select option 2, Firmware Management.
4. Select option 1, FLASH Download.
5. Type the IP address of your TFTP server and press the ENTER key.
6. Type the name of the appropriate languaged FLASH file and press the ENTER key.
7. Confirm the TFTP download by typing a y or yes and pressing the ENTER key.
8. The 2161DS Console Switch will verify that the file you downloaded is valid.
9. The 2161DS Console Switch will begin the FLASH upgrade process. On-screen indicators will display the upgrade progress. When the upload is complete, the 2161DS Console Switch will reset and upgrade the internal subsystems.
10. Once the upgrade is complete, a verification message will appear on screen.
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Upgrading Firmware Using a Serial Console
To upload a new FLASH file to the 2161DS Console Switch:
1. Connect a terminal or PC running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the 2161DS Console Switch using the supplied serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow
control.
2. If the 2161DS Console Switch is not powered up, turn it on now. The Power indicator on the front of the unit will blink for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the ENTER key to access the main menu.
3. You will see the Terminal Applications menu with seven options. Select option 2, Firmware Management.
4. Select option 1, FLASH Download.
5. Type the IP address of your TFTP server and press the ENTER key.
6. Type the name of the appropriate languaged FLASH file and press the ENTER key.
7. Confirm the TFTP download by typing a y or yes and pressing the ENTER key.
8. The 2161DS Console Switch will verify that the file you downloaded is valid.
9. The 2161DS Console Switch will begin the FLASH upgrade process. On-screen indicators will display the upgrade progress. When the upload is complete, the 2161DS Console Switch will reset and upgrade the internal subsystems.
10. Once the upgrade is complete, a verification message will appear on screen.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.