Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Embedded Box PC 5000 System BIOS
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides the BIOS update for Dell Embedded Box PC 5000 running the following Operation System: Windows and DOS.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Optimize the access procedure of SIO NCT6793D.
Read MoreVersion
1.0.2, A01
Release date
23 Jun 2016
Download Type
System BIOS
Category
BIOS
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats
File Format: CPG BIOS Executable for Windows/DOS
File Name: Embedded_Box_PC_5000_1.0.2.exe
File Size: 8.34 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
ef00ab501891c62fffce153548350a3b
SHA1:
180be07a65a7153fc545d5afccdf6d11f39866b9
SHA-256:
7dead4fc690ca39ca09573fe8e90d6613567395265d8f9db312ef28f6e2b4e91
By downloading, you accept the terms of the Dell Software License Agreement.
Applies to
BIOS
Installation instructions
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS/EC update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Press "Yes" to confirm the BIOS/EC version you want to update and start BIOS/EC Update process.
3. After BIOS/EC update finished, press Yes and then system will shut down, then power on the system to take effect.
4. If only update BIOS, after BIOS update finished, press "Yes" and then system will restart to take effect
Run the BIOS/EC update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS/EC update finished, press the power button to shut down, then power on the system to take effect.
5. If only update BIOS, after BIOS update finished, press "Yes" and then system will restart to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" Option
3. Change "UEFI" to"Legacy" Boot Mode
4. Go to "Exit > Save Changes and Reset" and then reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS/EC update finished, press the power button to shut down, then power on the system to take effect.
8. If only update BIOS, after BIOS update finished, press Yes and then system will restart to take effect.
9. Go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" to change Boot Mode from "Legacy" to "UEFI".
10. Go to "Boot > Secure Boot Control" to change Secure Boot from "Disabled" to "Enabled".
11. Go to "Exit > Save Changes and Reset" and then reboot system.
Reboot will be required
1. Click Download File, to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS/EC update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Press "Yes" to confirm the BIOS/EC version you want to update and start BIOS/EC Update process.
3. After BIOS/EC update finished, press Yes and then system will shut down, then power on the system to take effect.
4. If only update BIOS, after BIOS update finished, press "Yes" and then system will restart to take effect
Run the BIOS/EC update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS/EC update finished, press the power button to shut down, then power on the system to take effect.
5. If only update BIOS, after BIOS update finished, press "Yes" and then system will restart to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" Option
3. Change "UEFI" to"Legacy" Boot Mode
4. Go to "Exit > Save Changes and Reset" and then reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS/EC update finished, press the power button to shut down, then power on the system to take effect.
8. If only update BIOS, after BIOS update finished, press Yes and then system will restart to take effect.
9. Go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" to change Boot Mode from "Legacy" to "UEFI".
10. Go to "Boot > Secure Boot Control" to change Secure Boot from "Disabled" to "Enabled".
11. Go to "Exit > Save Changes and Reset" and then reboot system.
Reboot will be required
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.