Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell PERC H800 Adapter FW version 12.10.2-0004, A08
This package provides the firmware for PERC H800 Adapter firmware release 12.10.2-0004
Release Date 11/1/2011
Importance: Recommended
Version: 12.10.2-0004,A08 See Previous Versions

The following formats are available for the file you have selected

File Format: GnuPG Signature for Linux Update Package Download File Download File
File Name:

SAS-RAID_Firmware_D529D_LN32_12.10.2-0004_A08.BIN.sign

Description: The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Download Type: HTTP
File Size: 0.2KB

File Format: Hard-Drive Download File Download File
File Name:

DELL_PERC-H800-ADAPTER_A08_R315621.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 2MB

File Format: Rel-Notes-Text Download File Download File
File Name:

DELL_PERC-H800-ADAPTER_A08_R315621.txt

Description: This file format contains plain text which can be viewed with a standard text editor.
Download Type: HTTP
File Size: 10KB

File Format: Update Package for Microsoft® Windows® Download File Download File
File Name:

SAS-RAID_Firmware_D529D_WN32_12.10.2-0004_A08.EXE

Description: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Download Type: HTTP
File Size: 7MB

File Format: Update Package for Red Hat Linux Download File Download File
File Name:

SAS-RAID_Firmware_D529D_LN32_12.10.2-0004_A08.BIN

Description: Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Download Type: HTTP
File Size: 5MB

Previous Versions

12.10.1-0001, A07
<ul><li><b>Vendor Version :</b> 12.10.1-0001</li><li><b>Dell Version :</b> A07</li></ul>
3/23/2011 10:02:00 AM
12.10.0-0025, A06
<ul><li><b>Vendor Version :</b> 12.10.0-0025</li><li><b>Dell Version :</b> A06</li></ul>
11/11/2010 1:36:26 PM

Description

This package provides the firmware for PERC H800 Adapter firmware release 12.10.2-0004

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. * Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages. To stop the Dell OpenManage(TM) Server Administrator service, run "omconfig system webserver action=stop" To start the Server Administrator service, run "omconfig system webserver action=start" To stop the Server Administrator Storage Management Service, run "/etc/init.d/dataeng stop" To start the Server Administrator Storage Management Service, run "/etc/init.d/dataeng start"

Compatibility

Systems
External OEMR R910
PowerEdge C1100
PowerEdge C1100
PowerEdge M610x
PowerEdge R210
PowerEdge R210 II
PowerEdge R310
PowerEdge R410
PowerEdge R415
PowerEdge R510
PowerEdge R515
PowerEdge R610
PowerEdge R710
PowerEdge R715
PowerEdge R810
PowerEdge R815
PowerEdge R910
PowerEdge T310
PowerEdge T410
PowerEdge T610
PowerEdge T710
PowerVault DL2200
PowerVault DL2200 CommVault
PowerVault NX3000
PowerVault NX3100
Operating Systems
Not Applicable

Applies to

  • Dell Device
  • ASSY,CRD,CTL,PERCH800,512M,NVD
  • ASSY,CRD,CTL,PERCH800-512M,SAS
  • PERC H800 Adapter

Fixes & Enhancements

Fixes: - Fixes an issue where the Perc battery does not always charge up properly, causing VDs changing from WB to WT. Enhancements: - Removes system events that relate to partial Patrol completion on physical drives.

Installation instructions

            
Performing the Firmware Upgrade

NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.

1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.

Zip pack:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your 
hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the 
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully 
unzipped will appear.
5. Click the OK button to exit from the installer.

Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.


Windows Update Package:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to 
your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window 
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Linux Update Package:

Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the 
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before 
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.

GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
66b51796289d08f0bb1d101691ac3ade
SAS-RAID_Firmware_D529D_LN32_12.10.2-0004_A08.BIN
SHA1:
350aed286170f69e0082bb50d953f161124aaa6b
SAS-RAID_Firmware_D529D_LN32_12.10.2-0004_A08.BIN
SHA-256:
Not Available
SAS-RAID_Firmware_D529D_LN32_12.10.2-0004_A08.BIN

By downloading, you accept the terms of the Dell Software License Agreement.