Instructions for RAID_DRVR_WIN_R268783.EXE:

Download 

1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 

Installation 

1. Browse to the location where you downloaded the file and double-click the new file. 
2. Read over the release information presented in the dialog window. 
3. Download and install any prerequisites identified in the dialog window before proceeding. 
4. Click the Install button. 
5. Follow the remaining prompts to perform the update. 


Instructions for R268783.txt:

1) Click Download now.
   The File Download window appears.

2) Click the Save button.
   The Save As window appears.

3) Select Desktop using the drop-down menu to the right of Save in.

4) Click the Save button.
   A progress meter moves as the download is completed.

5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.

6) Double click the Icon on your desktop for the newly saved file.
   The Dell Bios Release Notes window appears.

Instructions for DELL_MULTI-DEVICE_A01_R268783.exe

Download 

1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 

Extract Files 
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 
2. Click Continue. 
3. Specify the location to unzip the files. 
4. Click on the OK button to extract files.
   After the files are extracted the message all files were successfully unzipped will appear. 
5. Click the OK button to exit from the installer. 


To build the installation media these files should be 
copied to a blank floppy diskette or USB key.


Installing the Driver during Operating System Installation
--------------------------------------------------------------

1. Power on the system and boot to the Microsoft Windows Server CD.
2. Follow the screen instructions until you reach the "Where do you want to install Windows?" section.
3. Insert the CD-ROM, DVD, USB flash drive, or floppy disk that contains the driver files.
4. At the Load Driver sub-screen, click Browse.
   Select the directory that has the controller driver files. Click OK.
5. At the Select the driver to be installed window, select the appropriate driver for the installed controller/OS and Click Next to load the driver files.
6. After the driver loads you will return to the "Where do you want to install Windows?" screen (partitions can be configured on this screen), 
   press "Next" again to continue the installation process as usual.
   
   
Installing a Windows Driver for a New RAID Controller
---------------------------------------------------------

Perform the following steps to configure the driver when you add the RAID controller to a system that already has Windows installed.

1. Power down the system.
2. Install the new RAID controller in the system.
   Refer to Hardware Installation for detailed instructions on installing and cabling the RAID controller in the system.
3. Power on the system.
   The Windows operating system should detect the new controller and display a message to inform the user.
4. The Found New Hardware Wizard screen pops up and displays the detected hardware device.
5. Click on "Next".
6. On the Locate device driver screen, select "Search" for a suitable driver for my device and click Next.
7. Insert the appropriate driver diskette or USB key and select that device 
   on the Locate Driver Files screen.
8. Click Next.
9. The wizard detects and installs the appropriate device driver for 
   the new RAID controller.
10.Click Finish to complete the installation.
11.Reboot the server.


Updating an Existing Windows Driver
---------------------------------------

Perform the following ste