Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Adaptec PERC2, PERC2/Si, PERC3/Si, PERC3/Di, v.2.8.0.6075, A12
This software contains the Windows NT4 driver for the DELL PERC 2, PERC 2/Si, PERC 3/Si, and PERC 3/Di controllers.
Release Date 4/14/2004
Importance: Recommended
Version: 2.8.0.6075,A12 See Previous Versions

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

nta12drv.exe

Description: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Download Type: HTTP
File Size: 167KB

Previous Versions

2.5.0.2988, A05
<ul><li><b>Vendor Version :</b> 2.5.0.2988</li><li><b>Dell Version :</b> A05</li></ul>
2/9/2001 2:58:11 PM

Description

This software contains the Windows NT4 driver for the DELL PERC 2, PERC 2/Si, PERC 3/Si, and PERC 3/Di controllers.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

This software code release requires all V2.8 components: firmware, device driver and management utilities. Using some components from previous releases may cause some unknown errors.

Compatibility

Systems
PowerEdge 1650
PowerEdge 2300
PowerEdge 2400
PowerEdge 2450
PowerEdge 2500
PowerEdge 2500SC
PowerEdge 2550
PowerEdge 2650
PowerEdge 4300
PowerEdge 4350
PowerEdge 4400
PowerEdge 4600
PowerEdge 6300
PowerEdge 6350
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
Operating Systems
MS Windows NT 4.0

Applies to

  • Dell Device
  • ASSY,CRD,CTL,PERC2,L,HW-REV
  • DSK,PROG,FLASH,RAID,P2450
  • PERC3/Di

Fixes & Enhancements

Fixes/Enhancements ================== -Filter driver checks Dispatch_Level before calling KeWaitForSingleObject avoid bugcheck 0xB8 -Modified unknown AIF handling to prevent Driver Verifier hang. -STATUS_INVALID_PARAMETER returned for requests with: Zero-length input buffer size.Invalid input buffer size, i.e. not the size of the expected structure. Invalid memory address for the input buffer.A null input buffer. -Deletes perc2hib reference in lower filter list rather than entire filter list via inf. -Corrected a major entry-point in the filter driver that Windows uses for major Plug-N-Play requests (IRP_MJ_PNP). This entry point was incorrectly passing the request to the next lower device in the device stack. -Deleted the section that removes the upper and lower filters. This section caused errors to be logged in the setupapi.log in Windows. -Added support for new vSCSI implementation

Installation instructions

            
Custom Instructions for nta12drv.exe:

Driver Installation for Windows NT 4.0
==============================================

To perform a fresh installation of the Windows NT device drivers 
for the controller, follow these steps:

1. Boot the system using the Windows NT 4.0 CD. 

2. When the message: "Setup is inspecting your computer's hardware
configuration" appears, press F6 immediately.

3. The Windows NT 4.0 Setup screen will appear, requesting
input for additional adapters in the system. Press 'S' to
specify an additional adapter.

4. A selection menu will appear. Scroll to "Other" and hit
ENTER.

5. Insert the driver diskette and press ENTER when prompted.

6. The selection:
"DELL PERC 2, 2/Si, 3/Si, 3/Di RAID CONTROLLERS"
will appear, hit ENTER.

7. After the driver has loaded, press ENTER to continue the installation.


NOTE: Before you perform the upgrade, uninstall the
Controller Management Software (FAST and the CLI).
See the installation guide associated with your
controller for instructions on how to uninstall the
Controller Management Software.

To upgrade the Windows NT device drivers for the controller,
follow these steps:
1. Follow this path from Start:

Start -> Settings -> Control Panel -> SCSI Adapters -> Drivers 

2. Click on 'ADD' in the Driver window.

3. The system displays an "Install Driver" window.
Select "Have Disk".

4. The system displays an "Install From Disk" window.
The "Install Driver" window instructs you to insert
the manufacturer's installation media into the drive
and click < Ok>. In this case, insert the diskette
that contains the NT device drivers for your
controller

5. Enter the drive and location of the files. The
default location on the diskette that contains the NT
device drivers is: "a:\".

The system displays a message identifying the
controller for which you want to upgrade the Windows
NT device drivers. The message requests that you
click the button.

6. The system displays "System Settings Change" and asks
if you want to restart the computer. Press YES.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
nta12drv.exe
SHA1:
Not Available
nta12drv.exe
SHA-256:
Not Available
nta12drv.exe

By downloading, you accept the terms of the Dell Software License Agreement.