Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
DELL_INSPIRON_2350_System_BIOS
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides the Dell System BIOS update and is supported on Dell INSPIRON 2350 System BIOS models that are running the following Operating System: Windows and DOS.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes and Enhancements
Fixes
1- Enhance showing the complete Hard Disk information in BIOS Setup menu for one Seagate HDD
Enhancements
1- Update CPU Firmware for new CPU support.
2- Change some SATA setting to enhance SATA HDD detection
Read MoreFixes
1- Enhance showing the complete Hard Disk information in BIOS Setup menu for one Seagate HDD
Enhancements
1- Update CPU Firmware for new CPU support.
2- Change some SATA setting to enhance SATA HDD detection
Version
A04, A04
Release date
20 Jan 2014
Download Type
System BIOS
Category
BIOS
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Flash BIOS executable
File Name: Inspiron_2350_A04.EXE
File Size: 12.64 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
To ensure the integrity of your download, please verify the checksum value.
MD5:
96bbca6b5f24e2ed8e863a143bb2ad0e
SHA1:
75d1ef5cece594b85389406d5bfd2fc7a9755549
SHA-256:
5de8bd063dd3ecc6edb929877a7a0e3d69a85954ba8d4cca657b792e97c83610
By downloading, you accept the terms of the Dell Software License Agreement.
Applies to
DELL Inspiron 2350
Installation instructions
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Press Yes to confirm the BIOS version you want to update and start BIOS Update process.
3. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOSUSB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" Option
3. Change "UEFI" to "Legacy" Boot Mode
4. Go to "Exit > Save Changes and Reset" and then reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, press Yes and then system will reboot to take effect
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot Mode" to change Boot Mode from "Legacy" to "UEFI"
9. Go to "Boot > Secure Boot Control" to change Secure Boot from "Disabled" to "Enabled"
10. Go to "Exit > Save Changes and Reset" and then reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Note3: Do not turn off power or interrupt BIOS update process during flashing BIOS
Reboot will be required
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Press Yes to confirm the BIOS version you want to update and start BIOS Update process.
3. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOSUSB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" Option
3. Change "UEFI" to "Legacy" Boot Mode
4. Go to "Exit > Save Changes and Reset" and then reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, press Yes and then system will reboot to take effect
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot Mode" to change Boot Mode from "Legacy" to "UEFI"
9. Go to "Boot > Secure Boot Control" to change Secure Boot from "Disabled" to "Enabled"
10. Go to "Exit > Save Changes and Reset" and then reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Note3: Do not turn off power or interrupt BIOS update process during flashing BIOS
Reboot will be required
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.