LSI 9202 SAS 6G RAID card FW release with legacy and UEFI Option Rom, P18, 2014 BLK2
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
LSI 9202 SAS 6G RAID card FW release with legacy and UEFI Option Rom, P18, 2014 BLK 2
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: 1. 4k sector size drives with 512e reporting enabled show wrong physical size when issueing a read capacity 16 command 2. Add Locale, class and ArgType for the Log code 3. Negotiated link speed for a 6G drive when connected to Cobra Expander ( EDFB/Databolt enabled phy's ) comes as 12G 4. Incorrect SAT error translation observed during Writesame command execution 5. Multiple 'Write Verify' SCSI commands with zero data length leads to f/w fault. 6. Information field is incorrectly populated for Verify command when accessing out of range LBA 7. Direct attached IBM SATA SSD drive is not getting detected 8. Speed Negotiation for 3Gig SATA drives is not handled properly 9. Drive drops while running Hard Reset Test. 10. IOC Init Multiple reply descriptor post queue host addresses
Enhancements: 1. Added Support for Report Luns Command
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
File Format:One or more self extracting disk images inside of a self extracting zip
File Name:P18_9202_IT_FW_BIOS_sas2flash.EXE
File Size:1.84 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Use sas2flash to flash the SAS controllers. please unzip the sas2flsh update utility in attachment
1. Copy all files to a folder. 2. Run "sas2flash -o -listsasadd" and record your SAS address. 3. Run "sas2flash -o -e 7" to erase the flash ROM. 4. Run "sas2flash -f 9202fw.fw" to update FW. 5. Run "sas2flash -b mptsas2.rom" to update teh MPT BIOS. 6. Run "sas2flash -b x64sas2.rom" if UEFI option support is needed. 7. Run "sas2flash -o -sasadd xxxxxxxxxxxxxxxxx" (xxxxxxxxxxxxxxxx the SAS address you record in step 2.) 8. Reboot system.