LSI 9265/9285/9285CV SAS RAID card FW

Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
LSI 9285/9265/9285CV SAS RAID card FW
Recommended

Find the best download for your system

Please enter your product details to view the latest driver information for your system

Search support

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

SCGCQ00309752 Defect BGI does not correct ECC medium errors on 2nd arm of Raid 10 array
SCGCQ00310954 Defect Irrelevant Popup message in HII due to FW filling MR_BIOS_DATA.bootTargetID with 1 when there is no VD or JBOD
SCGCQ00319081 Defect Drives dropped when flashing FW back from MR5.3 to 11M08 and FW crashes with TLB error
SCGCQ00321912 Defect When using 6GB drives with or without the interposer, the drives will not show.
SCGCQ00323019 Defect Change POST message for no" FoD key installed but config is on drives".
SCGCQ00327330 Defect Cannot import full foreign config after pulling and re-inserting SSD drives.
SCGCQ00329658 Defect Foreign config after reboot
SCGCQ00329666 Defect MR5.4 FW loses its time settings during the OCR.
SCGCQ00329727 Defect Voltage backdriving from serial port into adapter
SCGCQ00334399 Defect MegaRAID 5.5 firmware writes DDF revision 2.0 on the 512 sector drives
SCGCQ00334799 Defect True Random Number Generator BIST failed; Error code is 2
SCGCQ00335316 Defect FW breaks into Montask after running OCR during I/O
SCGCQ00335603 Defect when trying to import 64 VDs from a 1078 controller, the FW breaks into montask.
SCGCQ00336270 Defect Megacli64 Full init cause continuous error in ouput like this 156xxx end_request: I/O error, dev sdb, sector 0
SCGCQ00336788 Defect MegaRAID firmware does not detect devices after spin-up failure
SCGCQ00336798 Defect FW does not fail drive when excessive time is spent during recovery of CME's
SCGCQ00336822 Defect FW reports supercap device chemistry as "EDLC" but apps do not see any device chemistry
SCGCQ00336827 Defect FW reports Supercap FW version but apps do not see any supercap FW version
SCGCQ00337177 Defect MegaRAID firmware hangs when 4K sector drive is connected
SCGCQ00338468 Defect FW is flashed through Online Firmware Update method but no reset is performed after flashing
SCGCQ00338544 Defect MegaRAID firmware does not handle the Bad Block Log correctly
SCGCQ00339125 Defect When starting a reconstruction and rebooting the system to continue, debug message are constantly being scrolled
SCGCQ00339383 Defect iMR firmware continuously soft reset when running I/O using IOMETER on 16 RAID5 VDs
SCGCQ00339807 Defect 512E hard drives show up as unsupported drives.
SCGCQ00340107 Defect Firmware failed to import all VDs after enclosure is removed and re-insert
SCGCQ00340772 Defect Address Action Item SCGCQ00340495 (Check coding standard for structure OfuRequestState)
SCGCQ00342429 Defect Performance drop at QD 8 and above running 4 KB Seq. Read
SCGCQ00342925 Defect Overnight I/O on VDs w/SSC and breaking Multi-path breaks into MegaMon (Interposers)
SCGCQ00342940 Defect Running PR on Multi-path enclosure, removing one cable and reinserting it deletes all VDs
SCGCQ00346344 Defect MSM allows OFU from MR 5.5 fw to MR 5.4 firmware then failed during upgrade
SCGCQ00349622 Defect When importing various VDs with different stipe sizes and rebuild, the PDs come back failed
SCGCQ00350509 Defect After flash controller with 5.5, VDs are no longer handled by BIOS
SCGCQ00353078 Defect HII, WebBIOS & CLI reports supercap battery type as "SuperCapEDLC"
SCGCQ00353322 Defect Unable to enable ocr using application due to FW ocr setting taking precedence
SCGCQ00354841 Defect To Improve iMR Performance
SCGCQ00356707 Defect Multipath breaks into montask after VD creation
SCGCQ00356708 Defect maintainpdfailhistory = 0, but PDs come back as unconfigured bad anyway.
SCGCQ00360807 Defect Multi-Path is not re-enabling when cable is removed and re-inserted
SCGCQ00360925 Defect When a configured drive is pulled and re-inserted it is left foreign
SCGCQ00361288 Defect When going from 5.3+GCA or PKG 6 to PKG 16, unable to import config.
SCGCQ00361358 Defect Interposer Multi-path failover is failing 2 Drives from R5
SCGCQ00361661 Defect OFU is disabled by default
SCGCQ00362225 Defect Repeated power cycling the enclosure with interposers results in drives not dete
Read More

Version

23.11.0-0021, 23.11.0-0021

Release date

28 May 2013

Download Type

Firmware

Category

SAS RAID

Importance

Recommended
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats

File Format: One or more self extracting disk images inside of a self extracting zip
File Name: 23.11.0-0021_SAS_FW_IMAGE_APP_3.230.05.2100.EXE
File Size: 13.16 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
e30b25589e115d213fb57d4c477c3b76
SHA1:
d4004c244438dd3e47709e643ededde244ad3ddd
SHA-256:
091a1b705326c6e93213c56b8bca469ce7c8588269b5a938703d53050b46b6b3

File Format: A text file containing customer friendly fixes and enhancements information
File Name: EndUser LicenseAgreementType S_Rev. 040512.txt
File Size: 11.4 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c2ffe409366d225552ac6ed58f206b58
SHA1:
88522584d2ed8711c12c71ae9e569116a26e7b0a
SHA-256:
b85aae437264a3f053c9efec6b47fa1ba6610de28b749a06c2fec3dfc87bf333

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
LSI 9265-8i MegaRaid SAS
MegaRaid SAS 9280-8e
MegaRaid SAS 9285-8e
MegaRaid SAS 9285CV-8e
Download

1.Click Download now, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.


Installation
1. Browse to the location where you downloaded the file and double-click the new file.

2. Use MegaCLI to flash the SAS controllers.
Please unzip the MegaCLI update utility in attachment

Command Syntax: MegaCli -adpFwFlash -f mr2208fw.rom noverchk -a0

Reboot will be required

Drivers help and tutorials