Contact Us
Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
HLDS GCR-8483B HH 48X CD-ROM, v.1.10, A04
This is a DOS based firmware flash utility that will update the HLDS GCR-8483B CD-ROM (Dell Part numbers K3854, F3053, G8371, and H8443) to firmware revision 1.10.
Release Date 10/7/2005
Importance: Recommended
Version: 1.10,A04

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

R109672.EXE

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 184KB

Previous Versions

No previous version available.

Description

This is a DOS based firmware flash utility that will update the HLDS GCR-8483B CD-ROM (Dell Part numbers K3854, F3053, G8371, and H8443) to firmware revision 1.10.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

The executable will extract files needed to flash the drive in a DOS environment. These files need to be copied to a bootable DOS Floppy diskette or bootable DOS Memory Key. The executable does not create MS-DOS system files. This flash will update the drive's firmware to 1.10. You must remove the bootable Floppy diskette or bootable Memory Key and power cycle the system before using the drive. If the firmware re-flash fails (e.g., system hangs, etc.), power cycle the system and try again.

Compatibility

Systems
PowerEdge 1600SC
PowerEdge 1800
PowerEdge 400SC
PowerEdge 600SC
PowerEdge 700
PowerEdge 800
PowerEdge 830
PowerEdge SC 420
PowerEdge SC 430
PowerEdge SC1420
Operating Systems
Microsoft MS-DOS
Red Hat Ent Linux 2.1
Red Hat Linux 6.2
Red Hat Linux 7.0
Red Hat Linux 8.0
Red Hat Linux 9.0
Novell Netware
MS Windows Server 2003
MS Windows NT 4.0
MS Windows 2000
MS Windows 2003 x64

Applies to

  • GCR-8483B HH 48X CD-ROM

Fixes & Enhancements

Firmware 1.10: -Resolves an issue where the drive fails to automount media in Red Hat Enterprise Linux version 4

Installation instructions

            
Instructions for R109672.EXE

Download 

1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 

Extract Files 
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 
2. Click Continue. 
3. Specify the location to unzip the files. 
4. Click on the OK button to extract files.
   After the files are extracted the message all files were successfully unzipped will appear. 
5. Click the OK button to exit from the installer. 



Note: You will need to provide a bootable DOS Floppy diskette or a bootable DOS Memory Key.  
This package does not contain DOS system files.

Warning! Do not power cycle system during Firmware Flash Process.

Firmware Flash Procedure

1. Copy the files extracted from the Zip package to a bootable DOS Floppy diskette or a bootable DOS Memory Key.
2. Boot to the bootable DOS Floppy diskette or bootable DOS Memory Key.
3. The autoexec.bat will run and the firmware flash will begin automatically.  
4. When the firmware flash completes successfully remove the bootable DOS Floppy diskette or bootable DOS Memory Key. 
5. Power cycle the System.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
R109672.EXE
SHA1:
Not Available
R109672.EXE
SHA-256:
Not Available
R109672.EXE

By downloading, you accept the terms of the Dell Software License Agreement.