Dell Networking N2000 Series, Firmware Version 6.3.2.7
AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Both Dell Networking N2000 and N3000 Series switches share the same firmware image file (N3000_N2000v6.3.2.7.stk). If your N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware 6.3.2.7 as it contains multiple bug fixes.
New CPLD version 15 is available in this release for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.3.2.7, the CPLD can be updated to version 15 from CLI using the command - update cpld. To update CPLD on stack members, run - 'devshell cpldUpdate' command from serial console. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, it's required to do manual switch power-cycle. Verify CPLD Version with the command - 'show version' from CLI after power-cycle.
****Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.3.2.7 and CPLD Version 15 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.3.2.7 with the updated CPLD version 15 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.2.7 Firmware procedure.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.2.7_Release_Notes".
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: CS2502701-N4000-6.3.1.13-N4k Stack shows null/zero MAC in ARP table with PFC config. FIELD-2286-N4032-6.3.1.11-Switch hangs after neighbor-switch reloads manually. FIELD-2193/CS2611600-N4k/6.3.1.8: stack unit crash with task 'tRpcsrv.01000' FIELD-2310-N3048-6.3.2.4-Ubiquiti multicast frame is being looped on MLAG peer link. FIELD-2319-N4064F/6.3.2.4/MLAG primary unit had abrupt reboot task name 'emWeb' PSE036984,FIELD-2299-N1548-6.3.1.8-Fan speed oscillations causing more noise with no-change in temperature. FIELD-2261,FIELD-2323, FIELD-2327-N2048P-6.3.2.3-MAC address not learnt in certain VLAN.
Enhancements: None
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.2.7_Release_Notes".
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
(1) Download the zip file - N2000v6.3.2.7a28.zip (2) Extract the image file "N3000_N2000v6.3.2.7.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.2.7 Firmware.pdf" extracted from zip file.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.