LiteOnIT LMS-32L6M Solid State Drive Firmware Update
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides the Firmware Update for LiteOnIT LMS-32L6M MSATA 32GB, Revision DM5110E, and is supported on Precision, OptiPlex, Latitude, XPS, Alienware and Inspiron models running the following Windows operating systems: Vista, Windows 7 and Windows 8.
To view all drivers for your Vostro 3560, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
LMS-32L6M-DM5110E_ZPE.exe | 1.47 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
ZipPack External
File Name:
LMS-32L6M-DM5110E_ZPE.exe
File Size:
1.47 MB
Format Description
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
42fce35382b72038f9a11f983c4e65a6
SHA1:
188120a1da215d9889c9b7d998126bb880d202de
SHA-256:
0e759a69984bc48d3fc1866284d16b183c2c4cf1913a84b087347e6fea8dc1cd
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes
- Fixed SSD not detected under specific conditions.
Enhancements
- Not Applicable.
Read More
- Fixed SSD not detected under specific conditions.
Enhancements
- Not Applicable.
Version
DM5110E, A04
Release date
15 Nov 2013
Download Type
Firmware
Category
Storage
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Important Information
WARNING: As with all firmware updates, it is strongly recommended that you backup or make copies of all important files before performing this update. This firmware update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the firmware process is interrupted for any reason, your solid state drive may not function properly.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows Vista, 32-bit
Windows Vista, 64-bit
Looking for a different OS? View the list of Dell supported operating systems
Applies to
LiteOn LMS-32L6M
Installation instructions
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then Click "Update".
3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "OK" to proceed.
4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows.
6. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
------------------------------------------------------------------------------------------
Firmware upgrade through the DOS utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch AC Power.
3. The DOS utility supports only Intel systems.
Procedure
1. Go into the DOS sub-directory.
2. Insert a blank CD-R disc into your CD/DVD R/W drive.
3. Burn the ISO image into a CD-R media.
4. Insert the CD-R (created from the above steps) into the CD-ROM/DVD drive in the target system.
5. Boot your system from the CD/DVD drive (for instructions, please refer to the manual that came with your system).
6. Please select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "Y" to proceed.
8. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Remove the CD-R from your CD/DVD drive, and reboot your system. It will boot into Windows.
9. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
Reboot will be required
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch to AC Power.
Procedure
1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then Click "Update".
3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "OK" to proceed.
4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows.
6. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
------------------------------------------------------------------------------------------
Firmware upgrade through the DOS utility
ATTENTION
1. Backup the Solid-State Drive.
2. Switch AC Power.
3. The DOS utility supports only Intel systems.
Procedure
1. Go into the DOS sub-directory.
2. Insert a blank CD-R disc into your CD/DVD R/W drive.
3. Burn the ISO image into a CD-R media.
4. Insert the CD-R (created from the above steps) into the CD-ROM/DVD drive in the target system.
5. Boot your system from the CD/DVD drive (for instructions, please refer to the manual that came with your system).
6. Please select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "Y" to proceed.
8. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Remove the CD-R from your CD/DVD drive, and reboot your system. It will boot into Windows.
9. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
Reboot will be required
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.