¿Necesita soporte de TPM?
Para obtener información útil adicional, consulte la base de conocimientos. Ver el artículo.Dell ControlVault, v.1.2.00208.033, A08
INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
6.100.153 Production USH Firmware CID7
Recomendado
Encuentre la mejor descarga para su sistema
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistemaBuscar soporte
Ingrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo
Este controlador no es compatible
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Inicie sesión en Windows como administrador para utilizar el escaneo automático. Si ya inició sesión como administrador y ve este mensaje, reinicie el sistema. El administrador de TI administra el sistema y es posible que las funciones sean limitadas.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
- Functionality fixes / workaround for various Smart Cards
- Fix for firmware lock when removing a Smart Card after being asked for a PIN
- Fix for DOS upgrade error for systems with Upek sensor
- Enumeration changes to disallow USB transactions until fully enumerated by the host
Más información- Fix for firmware lock when removing a Smart Card after being asked for a PIN
- Fix for DOS upgrade error for systems with Upek sensor
- Enumeration changes to disallow USB transactions until fully enumerated by the host
Versión
1.2.00208.033, A08
Fecha de publicación
02 abr 2009
Tipo de descarga
Firmware
Categoría
Seguridad
Importancia
RecomendadoDell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles
Formato de archivo: ZipPack externo
File Name: Dell_ControlVault_A08_R214858.exe
Tamaño del archivo: 5.25 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible
Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)
Sistemas operativos compatibles
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
MS Windows Vista de 64 bits
Windows XP
Windows XP, 64-bit
Instrucciones de instalación
Custom Instructions for Dell_ControlVault_A08_R214858.exe:
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
-----------------
UPDATE PROTECTION
-----------------
Please note: The BCM5880 firmware update process contains 2 protection mechanisms to prevent unauthorized updates.
Protection Mechanism 1: TPM Deactivation.
If the Trusted Platform Module (TPM) on the target computer has ever been activated in the past, in order to update the BCM5880 firmware, the TPM must be set to ON and DEACTIVE in the BIOS SETUP program before the firmware update will run. If the TPM on the target platform has never been activated previously, then this step is NOT necessary.
Protection Mechanism 2: Anti-Hammering.
The BCM5880 is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the BCM5880 will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the BCM5880 has just been recently used. In this case, the firmware update tool will prompt you to power off and then power the system back on, and then proceed with the firmware update.
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''t exist, you''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The BCM5880 firmware must be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run UPDATE.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Windows XP.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Vista.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. R
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
-----------------
UPDATE PROTECTION
-----------------
Please note: The BCM5880 firmware update process contains 2 protection mechanisms to prevent unauthorized updates.
Protection Mechanism 1: TPM Deactivation.
If the Trusted Platform Module (TPM) on the target computer has ever been activated in the past, in order to update the BCM5880 firmware, the TPM must be set to ON and DEACTIVE in the BIOS SETUP program before the firmware update will run. If the TPM on the target platform has never been activated previously, then this step is NOT necessary.
Protection Mechanism 2: Anti-Hammering.
The BCM5880 is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the BCM5880 will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the BCM5880 has just been recently used. In this case, the firmware update tool will prompt you to power off and then power the system back on, and then proceed with the firmware update.
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''t exist, you''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The BCM5880 firmware must be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run UPDATE.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Windows XP.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Vista.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. R
Ayuda y tutoriales para controladores
Para obtener más descargas, vaya a Controladores y descargas. Para obtener ayuda con el uso de la información en esta página, visite Tutoriales y ayuda sobre controladores.