Dell BMC Firmware, v.1.83, A10

INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
The Baseboard Management Controller (BMC) flash utility is a tool to update firmware (FW) to the Baseboard Management Controller. This firmware update is a non-destructive update. User data is not affected.
Recomendado

Encuentre la mejor descarga para su sistema

Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema

Buscar soporte

Ingrese su modelo o etiqueta de servicio de Dell

¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo

Este controlador no es compatible

Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.

Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.

Correcciones y mejoras

Fix the incorrect entity instance number of CPUs and PSUs shown in the inventory info of VMware ESX.
Más información

Versión

1.83, A10

Fecha de publicación

30 jun 2009

Tipo de descarga

Firmware

Categoría

Administración integrada de servidores

Importancia

Opcionales
Dell Technologies recomienda revisar esta actualización para determinar si corresponde a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formatos disponibles Ver información importante

Formato de archivo: Paquete de actualizaciones para MS Windows de 32 bits
File Name: BMC_FRMW_WIN_R223079.EXE
Tamaño del archivo: 4.5 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Los paquetes de actualizaciones de Dell (DUP) en el formato de 32 bits de Microsoft Windows han sido diseñados para ejecutarse en los sistemas operativos de 64 bits de Microsoft Windows. Los paquetes de actualizaciones de Dell (DUP) en el formato de 64 bits de Microsoft Windows solo se ejecutarán en los sistemas operativos de 64 bits de Microsoft Windows. Al seleccionar una actualización de un controlador de dispositivo asegúrese de seleccionar el que sea apropiado para su sistema operativo.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
910A839446A6947EFDF303B88038D089
SHA1:
No disponible
SHA-256:
No disponible

Formato de archivo: Un archivo de GnuPG que contiene una firma criptográfica
File Name: BMC_FRMW_LX_R223079.BIN.sign
Tamaño del archivo: 194 Bytes
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
La firma GnuPG para el paquete de actualización para Red Hat Linux se puede usar para autenticar la identidad de Dell en el paquete de actualización para Red Hat Linux correlativo.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
D658C01C34B00B6A01FDB72191B8AC91
SHA1:
No disponible
SHA-256:
No disponible

Formato de archivo: Extrae archivos directamente al disco local
File Name: PE2800-2850BmcA10.exe
Tamaño del archivo: 265 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo consiste en un archivo de archivos que se pueden descomprimir a un directorio en el disco duro. La instalación puede realizarse desde ese directorio.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
a3ab438d863f2c6cbe9b7c36ae582993
SHA1:
No disponible
SHA-256:
No disponible

Formato de archivo: Paquete de actualización para Red Hat Linux
File Name: BMC_FRMW_LX_R223079.BIN
Tamaño del archivo: 3.62 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Los paquetes de actualización de Dell para Linux se pueden utilizar como aplicaciones independientes que garantizan que se satisfagan los criterios de validación específicos, y luego aplicar una actualización.
Nota: los paquetes de actualización para Linux son de código abierto. Para obtener más detalles, consulte el archivo Léame de los paquetes de actualización de Dell para Linux.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
152C49F7675703C1FECC49A82F0EA418
SHA1:
No disponible
SHA-256:
No disponible

Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)

Detalles adicionales

Mostrar todo | Esconder todo
###############################################################
Important Information for Update Packages for Microsoft Windows
###############################################################

* Do not run other applications while executing Dell Update Packages.

* When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.

To speed up the time it takes to perform such updates on PowerEdge x8xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice".

* When upgrading the BMC/ESM firmware on PowerEdge x8xx servers with the Windows Server 2003 R2 IPMI driver installed, unnecessary multiple time-out warning messages from source "IPMIDRV" with Event ID 1004 are logged in the System Log in the Event Viewer console.

These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice".

For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.

###################################################
Important Information for Update Packages for Linux
###################################################

* Do not run other applications while executing Dell Update Packages.

* If the following error occurs, "Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory", you must install the compatibility libraries from "www.redhat.com" or from the Red Hat CD. To install the compatibility libraries, use the following command: "RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"

* Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at "support.dell.com".
FRU/SEL
Instructions for BMC_FRMW_LX_R223079.BIN:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation

1. Read over the release information presented by executing the ./BMC_FRMW_LX_R223079.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./BMC_FRMW_LX_R223079.BIN from the shell.
4. Follow the remaining prompts to perform the update.


GnuPG Signature of Dell Update Package Instructions for BMC_FRMW_LX_R223079.BIN.sign:

Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, BMC_FRMW_LX_R223079.BIN.sign

Instructions for BMC_FRMW_WIN_R223079.EXE:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Custom Instructions for PE2800-2850BmcA10.exe:

Download

1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.


Extract Files

1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.

Additional Instructions

MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive where the files were un-zipped.
3. At the DOS prompt, type "BMCFL16D". This will run BMCFL16D.EXE
4. Answer at the prompt to begin the upgrade.


Ayuda y tutoriales para controladores