No apague la computadora ni la desconecte de la fuente de alimentación mientras se actualiza el BIOS, ya que podría dañarse la computadora. Durante la actualización, la computadora se reiniciará y es posible que vea brevemente una pantalla negra.

Antes de la actualización, lea las instrucciones de instalación y la información importante que se indica a continuación.

Dell Dimension System BIOS, A02

INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Dimension 2300 A02 FlashBIOS
Recomendado

Encuentre la mejor descarga para su sistema

Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema

Buscar soporte

Ingrese su modelo o etiqueta de servicio de Dell

¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo

Este controlador no es compatible

Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.

Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.

Correcciones y mejoras

The following changes were made to the A01 BIOS to create A02:

1. Updated support for newer Pentium 4 and Celeron CPU's.
2. Updated support for IDE UDMA and for Large Hard Disks.
3. Make user and setup passwords work like other DELL systems.
4. Allow skipping memory test during POST with space bar.
Más información

Versión

A02, A02

Fecha de publicación

18 sept 2002

Tipo de descarga

BIOS del sistema

Categoría

BIOS

Importancia

Opcionales
Dell Technologies recomienda revisar esta actualización para determinar si corresponde a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formatos disponibles

Formato de archivo: Una o varias imágenes de disco de autoextracción dentro de un .zip de autoextracción
File Name: B2300_02.exe
Tamaño del archivo: 412 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible

Formato de archivo: Flash BIOS executable
File Name: 2300_A02.EXE
Tamaño del archivo: 286.28 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo consiste en un archivo ejecutable de BIOS. Para actualizar su sistema, descargue el archivo y guárdelo en su escritorio o disco duro, luego ejecute el archivo ejecutable. Para actualizar el BIOS, su sistema debe tener alimentación de CA y un nivel de carga de la batería de al menos 10%.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible

Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)

Detalles adicionales

Mostrar todo | Esconder todo
Dimension System BIOS


Default Instructions for 2300_A02.EXE:

Creating the disk:
NOTE: This procedure requires one blank bootable, formatted 3.5-inch
floppy disk. Label the disk BIOS.

1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Insert the blank bootable formatted 3.5-inch floppy disk.
7. Right-click the copy of the file, point to “Send To”, click “3 1/2
Floppy (a)”, and then skip to the section Flashing the BIOS below.

Flashing the BIOS:
NOTICE: Changing the system BIOS may result in unintended side affects,
such as incompatibility of the new BIOS with installed hardware. If
problems arise after a BIOS change, it may be necessary to return the
system to the original version of the BIOS.
1. If you are flashing the BIOS on a portable computer, be sure that
the AC adapter is plugged in and the computer is not operating on battery
power.
2. Ensure that the Flash BIOS disk is inserted into the floppy disk
drive.
3. Click the “Start” button, click “Shut Down”, click “Restart”, and
then click “Ok”.
The computer should restart and boot to the floppy disk.

NOTE: If the flash BIOS program does not start, and you see only an A:\
prompt, refer to the instructions from the Dell File Library page for the
BIOS update or to the Readme.txt instructions. Generally, you will type
the name of the executable flash BIOS file such as 8100_A09.EXE for BIOS
version A09 on the Dimension™ 8100 series system.

A Press any key to continue prompt appears.
4. Press the “Enter” key.
A Press Y to replace old BIOS with new BIOS prompt appears.
5. Press the “Y” key.

NOTICE: Do not interrupt the system during this process. Please refrain
from pressing any keys on the keyboard, moving the mouse, or interrupting
power to the system. Failure to do so could result in damage to the system
BIOS.

When the computer has finished updating the BIOS, a Flash program
successful. Press any key to reboot prompt appears.
6. Remove the floppy disk and press the “Enter” key.
7. The computer will now restart with the new revision of the BIOS
installed.
The boot screen will indicate the BIOS version.

If you encounter device or resource errors after flashing the system BIOS,
enter the System Setup, clear the NVRAM and restore the system defaults.
For more information, refer to Dell Knowledge Base Articles:
· FA1035262 Title "How do I restore setup defaults on my Dell
Dimension™ system?"
· FA1023538 Title "How do I clear NVRAM on my Dell Dimension system?"




Floppy Disk Boot to Disk for B2300_02.exe

Download

1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Hard Drive Floppy Disk Creation

1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to t

¿Necesita ayuda con los problemas de BIOS?

Busque la solución en la Guía de uso y solución de problemas de BIOS de Dell.

Ayuda y tutoriales para controladores