Chelsio S310 Single-Port 10G, PCI/PCIE x8, v.1.5.13.24 , A00

Custom Instructions for R275379chelsio-1.5.13.24.zip:

Build and Install
================================================================================
The driver must be installed by the root user, any attempt in installing the
driver as a regular user will fail to install.

If building the driver for a kernel other than the current running kernel, it
will be necessary to pass in KSRC= to make. Furthermore, if your
build tree is in a different location than the source tree, you will need to
pass in KOBJ= to make as well.

The src directory contains the driver source files for building kernel modules.
To build the TOE driver, change to the src/ directory and run:
make
make install

To build the NIC driver (without offload support),
change to the src/ directory and run:
make nic
make nic install

Only one type of driver needs to be compiled, NIC or TOE, not both. The TOE
driver is built by default, without passing any arguments to make. Building
the TOE driver also provides NIC only support if the 't3_tom' driver is not
loaded. Once the t3_tom module is loaded, all new TCP connections will be
offloaded. If there are any TCP listening servers started before t3_tom has
been loaded, it will be necessary to restart those servers for TCP to be
offloaded.