Dell PowerConnect 3248, v. 1.31, A01

AUTOMATISCH INSTALLIERT Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
General Discription

The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000

This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.

The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
Empfohlen

Den besten Download für Ihr System suchen

Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.

Support suchen

Dell Service-Tag-Nummer oder Modell eingeben

Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein. Anleitung

Dieser Treiber ist nicht kompatibel.

Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.

Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.

Fehlerkorrekturen und Verbesserungen

Version

1.31, A01

Veröffentlichungsdatum:

25 Juli 2002

Downloadtyp:

Anwendungen

Kategorie

Netzwerk

Wichtigkeit

Optional
Dell Technologies empfiehlt, dieses Update zu überprüfen, um festzustellen, ob es für Ihr System gilt. Das Update enthält Änderungen, die sich nur auf bestimmte Konfigurationen auswirken, oder bietet neue Funktionen, die für Ihre Umgebung gelten können aber nicht müssen.
Verfügbare Formate

Dateiformat: Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname: PWRNTSM.zip
Dateigröße: 5.1 MB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
Um die Integrität Ihres Downloads zu sichern, prüfen Sie bitte den Prüfsummenwert.
MD5:
Nicht verfügbar
SHA1:
Nicht verfügbar
SHA-256:
Nicht verfügbar

Mit dem Download stimmen Sie der Dell Softwarelizenzvereinbarung (in Englisch)  zu.

*****This file contains a compressed (or zipped) set of files. You will
need a compression tool such as WinZip. Download the file to a folder on
your hard drive, and then run (double-click) it to unzip the set of files.
Follow the instructions and then use the Upgrade Instructions to complete
the installation.

Software Installation
The setup program will install the Dell PowerConnect Switch Manager This
program decompresses files and copies them to a location you specify on
your hard disk. During installation you will be prompted to assign the
program group.

NOTE: Install HP OpenView NNM on your platform before installing this
package. You will be asked to provide your OpenView directory during the
installation process for the Dell PowerConnect Switch Manager.
Installation steps:

1. Start Windows.
2. Use the NNM Services Stop command to stop all HP OpenView NNM
background processes, if any. (This has the same effect as executing
ovstop from the command line.)
3. Download DellPwrConnectSwitchMgr.exe from Dell’s support website (
http://support.dell.com). Copy the self extractable
DellPwrConnectSwitchMgr.exe to the temp directory.
4. Type DellPwrConnectSwitchMgr.exe at the command prompt and unzip to
the temp directory.
5. Type SETUP at the Command Prompt.
6. Click OK to start setup.
7. Follow the on-screen instructions to install the software.

Benötigen Sie Hilfe bei Problemen mit der Netzwerkverbindung?

Sie finden eine Lösung im Dell Benutzerhandbuch zur Verwendung des Netzwerks und zum Troubleshooting.

Treiber – Hilfe und Lernprogramme