Driver Details

LSI Logic PERC3/DC-Workstations, v.1w61, A03

This is a firmware and BIOS upgrade for the PERC 3/DCP. This upgrades
the Firmware to version 1w61 and the BIOS to version 3.17. This firmware
upgrade is only recommended for users who connect to PowerVault storage
enclosures. It is important to back up data before performing this
upgrade. It is possible that the controller might be rendered unusable
should a power loss occur during the upgrade process. If this occurs,
Dell will replace if necessary on a next business day basis. For best
enclosure management support, PERC 3/DCP users should also upgrade their
RAID management utility to PERC Console Plus 5.00c, Dell version A02

Fixes & Enhancements

This firmware and BIOS upgrade is only recommended for PERC 3/DCP users
who connect their PERC 3/DCP adapter to a PowerVault storage enclosure

Version

Version 1w61, A03

Release date

26 Mar 2002

Last Updated

03 Nov 2011

Importance

Optional

Available formats

File Format:Floppy
File Name:D4054303.exe
Download Type:HTTP
File Size: 743KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Compatible Systems

Supported Operating Systems

MS Windows NT 4.0
MS Windows 2000
MS Windows XP

Applies to

PERC3/DC-Workstations

Installation instructions



Floppy Disk Boot to Disk for D4054303.exe

Download

1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Hard Drive Floppy Disk Creation

1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.

Install

1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.




Important Information

It is important to back up data before performing this upgrade. It is
possible that the controller might be rendered unusable should a power
loss occur during the upgrade process.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.