Driver Details

HLDS GCR-8481B HH 48X CD-ROM, v.JV2DE108, A00

DOS based firmware flash utility update for "HLDS GCR-8481B 48X CD ROM Drive".

Version

  • Version JV2DE108, A00

Applies to

GCR-8481B HH 48X CD-ROM;

Date

Release date
10 Nov 2003
Last Updated
03 Nov 2011

Importance

Optional. Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Available formats

File Format:Floppy
File Name:BR69182.exe
Download Type:HTTP
File Size: 872KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

This is a DOS based utility. The update will create a bootable diskette that must be used under DOS (not under Windowed DOS box). This flash will update the drive's firmware to 1.08. You must remove the floppy disc and reboot the system before using the drive.If the firmware reflash fails ( e.g., system hangs, etc. ), reboot the system and try again.

Fixes & Enhancements

This firmware fixes a Linux Mandrake 9.2 and HLDS 48X CD ROM drive incompatibility issue.

Installation instructions

Hard Drive Floppy Disk Creation for BR69182.exe

1. Get 1 blank, formatted floppy disks.
2. Click the new icon on the desktop. The Self-Extractor window appears.
3. Click Setup. An MS-DOS window appears with a message indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. Once the files have been copied to the diskette a message appears prompting you to insert the second diskette.
7. Repeat steps 4 – 6 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.

Floppy Disk Setup.exe

1. Insert the first disk of the set or the only disk.
2. Click Start and then click Run.
3. In the Open textbox, type a:\setup.
4. Follow the on-screen instructions.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more