Dell PowerVault 35F, D9913D
INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
PowerVault 35F, firmware d9913d
Recomendado
Encuentre la mejor descarga para su sistema
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistemaBuscar soporte
Ingrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo
Este controlador no es compatible
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Inicie sesión en Windows como administrador para utilizar el escaneo automático. Si ya inició sesión como administrador y ve este mensaje, reinicie el sistema. El administrador de TI administra el sistema y es posible que las funciones sean limitadas.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
This release resolves a Netware issue in which the Veritas Backup Exec
v8.5 startup sequence may hang with "Initializing Tape Hardware" when
configured in a shared storage (SSO) environment.
Más informaciónv8.5 startup sequence may hang with "Initializing Tape Hardware" when
configured in a shared storage (SSO) environment.
Versión
d9913d, D9913D
Fecha de publicación
06 feb 2001
Tipo de descarga
Firmware
Categoría
Fibre Channel
Importancia
OpcionalesDell Technologies recomienda revisar esta actualización para determinar si corresponde a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formatos disponibles
Formato de archivo: ZipPack externo
File Name: d9913d.exe
Tamaño del archivo: 601.37 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible
Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)
Sistemas operativos compatibles
No corresponde
Instrucciones de instalación
PowerVault 35F Firmware Download Instructions
The PowerVault 35F can either use FTP, TFTP or a serial connection (using
the XMODEM protocol) to update the firmware. In order to update the
firmware via the serial connection, the PowerVault 35F must be connected
to a terminal emulation program supporting XMODEM transfers. This menu
item does not appear when accessing the configuration menus through Telnet.
1. Download and run the file D9913D.EXE. This will extract the contents
of the archive to a temporary directory (i.e. x:\Dell\Drivers\PV35F\).
2. Decide the method for firmware download (FTP, TFTP, or Serial
Connection) and proceed to the appropriate instructions.
FTP Method
1. Make sure your PowerVault 35F is connected to a network and the IP
address is set properly.
2. Start your FTP program using the PowerVault 35F’ s IP address. Type
ftp (IP address).
NOTE: The default IP address is 1.1.1.1. See your PowerVault 35F User’s
Manual for instructions on changing the IP address.
3. Use root as the user name and password as the password.
NOTE: This is the default user name and password for the PowerVault 35F.
If you have changed the user name or password, then use the updated
settings in place of the default settings.
4. Specify binary mode by typing bin.
5. Specify the firmware’s path and filename with the put command. Type
put (path:filename).
The file will transfer and the PowerVault 35F will reboot. The PowerVault
35F is now using the new firmware.
NOTE: You may want to confirm the new firmware level by checking the
PowerVault 35F’s reboot messages through the serial interface.
TFTP Method
1. Make sure your PowerVault 35F is connected to a network and the IP
address is set properly.
2. At the command line, type the following tftp -i (IP address) put
(path:filename).
The file transfer process will begin. The PowerVault 35F will
automatically reboot upon completion of the download.
NOTE: You may want to confirm the new firmware level by checking the
PowerVault 35F’ s reboot messages through the serial interface.
Serial Port (Terminal Emulator)
NOTE: For quicker downloading, configure the PowerVault 35F and the
terminal emulator utility session connected to it (such as Hyperterminal)
to run at 115200.
1. Establish a Serial Connection to the PowerVault 35F. Refer to the
PowerVault 35F User’s Manual for the serial port settings.
2. From the Advanced Options menu, select the Download a new revision of
the Firmware command to start the download procedure.
3. When you confirm the download, the PowerVault 35F will start the
download process.
4. Use the Transfer -> Send File option in the terminal emulator utility.
5. Select the location of the firmware. Use the Browse button, if you
need help locating the firmware file.
6. Make sure you select XMODEM as the protocol.
7. Press the Send button.
8. The firmware will begin to download.
When the download is complete, the system verifies that the firmware image
was successfully written to the FLASH memory and then reboots the
PowerVault 35F. Upon reboot, the PowerVault 35F detects that there is a
newly downloaded firmware image and copies that image to the boot sector
of the FLASH and then boots with that image. At that point the PowerVault
35F is using the new firmware image.
The PowerVault 35F can either use FTP, TFTP or a serial connection (using
the XMODEM protocol) to update the firmware. In order to update the
firmware via the serial connection, the PowerVault 35F must be connected
to a terminal emulation program supporting XMODEM transfers. This menu
item does not appear when accessing the configuration menus through Telnet.
1. Download and run the file D9913D.EXE. This will extract the contents
of the archive to a temporary directory (i.e. x:\Dell\Drivers\PV35F\).
2. Decide the method for firmware download (FTP, TFTP, or Serial
Connection) and proceed to the appropriate instructions.
FTP Method
1. Make sure your PowerVault 35F is connected to a network and the IP
address is set properly.
2. Start your FTP program using the PowerVault 35F’ s IP address. Type
ftp (IP address).
NOTE: The default IP address is 1.1.1.1. See your PowerVault 35F User’s
Manual for instructions on changing the IP address.
3. Use root as the user name and password as the password.
NOTE: This is the default user name and password for the PowerVault 35F.
If you have changed the user name or password, then use the updated
settings in place of the default settings.
4. Specify binary mode by typing bin.
5. Specify the firmware’s path and filename with the put command. Type
put (path:filename).
The file will transfer and the PowerVault 35F will reboot. The PowerVault
35F is now using the new firmware.
NOTE: You may want to confirm the new firmware level by checking the
PowerVault 35F’s reboot messages through the serial interface.
TFTP Method
1. Make sure your PowerVault 35F is connected to a network and the IP
address is set properly.
2. At the command line, type the following tftp -i (IP address) put
(path:filename).
The file transfer process will begin. The PowerVault 35F will
automatically reboot upon completion of the download.
NOTE: You may want to confirm the new firmware level by checking the
PowerVault 35F’ s reboot messages through the serial interface.
Serial Port (Terminal Emulator)
NOTE: For quicker downloading, configure the PowerVault 35F and the
terminal emulator utility session connected to it (such as Hyperterminal)
to run at 115200.
1. Establish a Serial Connection to the PowerVault 35F. Refer to the
PowerVault 35F User’s Manual for the serial port settings.
2. From the Advanced Options menu, select the Download a new revision of
the Firmware command to start the download procedure.
3. When you confirm the download, the PowerVault 35F will start the
download process.
4. Use the Transfer -> Send File option in the terminal emulator utility.
5. Select the location of the firmware. Use the Browse button, if you
need help locating the firmware file.
6. Make sure you select XMODEM as the protocol.
7. Press the Send button.
8. The firmware will begin to download.
When the download is complete, the system verifies that the firmware image
was successfully written to the FLASH memory and then reboots the
PowerVault 35F. Upon reboot, the PowerVault 35F detects that there is a
newly downloaded firmware image and copies that image to the boot sector
of the FLASH and then boots with that image. At that point the PowerVault
35F is using the new firmware image.
Ayuda y tutoriales para controladores
Para obtener más descargas, vaya a Controladores y descargas. Para obtener ayuda con el uso de la información en esta página, visite Tutoriales y ayuda sobre controladores.