Não desligue o computador nem o desconecte da fonte de energia durante a atualização do BIOS, pois isso pode prejudicar o computador. Durante a atualização, o computador será reiniciado e você pode ver uma tela preta por um momento.

Antes de atualizar, leia as instruções de instalação e as informações importantes mencionadas abaixo.

Dell OptiPlex System BIOS, A10

INSTALADO AUTOMATICAMENTE Este arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Optiplex GX1 / NX1 / GX1p A10 FlashBIOS
Recomendado

Encontre a melhor opção de download para seu sistema

Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistema

Pesquisar no suporte

Digite a etiqueta de serviço ou o modelo da Dell

Quer procurar o seu produto? Digite um identificador do produto. Mostre-me como

Este driver não é compatível

Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.

Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.

Correções e aprimoramentos

The following changes have been made to BIOS revision A09 to create A10.

1. New NIC.ROM to fix booting across Cisco routers. Version .99n.02
2. Updated the copyright to 2001.
Ler mais

Versão

A10, A10

Data da versão

10 set. 2001

Tipo de download

BIOS do sistema

Categoria

BIOS

Importância

Opcional
A Dell Technologies recomenda analisar esta atualização para determinar se ela é válida para seu sistema. A atualização contém alterações que afetam apenas determinadas configurações ou oferece novos recursos que podem ou não ser válidos para seu ambiente.
Formatos disponíveis

Formato do arquivo: Uma ou mais imagens de disco de autoextração dentro de um zip de autoextração
Nome do arquivo: BGX1_A10.exe
Tamanho do arquivo: 366 KB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este arquivo contém um conjunto compactado (ou zipado) de arquivos. Faça download do arquivo em uma pasta no disco rígido e, em seguida, dê dois cliques para descompactar o conjunto de arquivos. Siga as instruções para concluir a instalação.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
Não disponível
SHA1:
Não disponível
SHA-256:
Não disponível

Formato do arquivo: Flash BIOS executável
Nome do arquivo: Gx1_a10.exe
Tamanho do arquivo: 209.96 KB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este formato de arquivo consiste em um arquivo executável do BIOS. Para atualizar seu sistema, faça download do arquivo e salve-o na área de trabalho ou no disco rígido. Em seguida, execute o executável. Para atualizar o BIOS, seu sistema precisa de uma fonte CA conectada e o nível de carga da bateria precisa ser de, no mínimo, 10%.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
Não disponível
SHA1:
Não disponível
SHA-256:
Não disponível

Ao fazer o download, você aceita os termos do Contrato de Licença de Software da Dell (em Inglês).

Mais informações

Mostrar tudo | Ocultar tudo
OPTIPLEX 330 SYSTEM BIOS
OptiPlex System BIOS
Floppy
Creating the disk:
NOTE: This procedure requires one blank, formatted 3.5-inch floppy disk;
label the disk BIOS.

1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Find the downloaded file on your Desktop, if it looks like a
floppy disk, double-click it and skip to Step 7.

NOTE: If the Security Warning window appears, click “Yes”.


7. Click “Setup”.
A DOS Window appears.
8. Press the “Enter” key.
9. Insert the floppy disk into the floppy disk drive and press
the “Enter” key.
10. Press the “Y” key to begin copying files.
An End of the disk set prompt appears.
11. Press the “Enter” key.
12. Click the “Start” button, click “Run”, and then type a: in the
Open box. Click “OK’.
The list of files on the floppy disk appears.
13. If there is a readme file in the list, double-click it for
additional instructions.
14. Close all open windows and leave the disk in the floppy drive.
Skip to the section Flashing the BIOS below

NOTE: If you are creating this disk on another computer, remove the disk.
Then insert it into the system that needs the BIOS flashed, and resume the
procedure.

Non-Packaged
Creating the disk:
NOTE: This procedure requires one blank bootable, formatted 3.5-inch
floppy disk; label the disk BIOS.

1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Insert the blank bootable formatted 3.5-inch floppy disk.
7. Right-click the copy of the file, point to “Send To”, click “3 1/2
Floppy (a)”, and then skip to the section Flashing the BIOS below.

Flashing the BIOS:
NOTICE: Changing the system BIOS may result in unintended side affects,
such as incompatibility of the new BIOS with installed hardware. If
problems arise after a BIOS change, it may be necessary to return the
system to the original version of the BIOS.
1. If you are flashing the BIOS on a portable computer, be sure that
the AC adapter is plugged in and the computer is not operating on battery
power.
2. Ensure that the Flash BIOS disk is inserted into the floppy disk
drive.
3. Click the “Start” button, click “Shut Down”, click “Restart”, and
then click “Ok”.
The computer should restart and boot to the floppy disk.

NOTE: If the flash BIOS program does not start, and you see only an A:\
prompt, refer to the instructions from the Dell File Library page for the
BIOS update or to the Readme.txt instructions. Generally, you will type
the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS
version A10 on the OptiPlex™ series system.

A Press any key to continue prompt appears.
4. Press the “Enter” key.
A Press Y to replace old BIOS with new BIOS prompt appears.
5. Press the “Y” key.

NOTICE: Do not interrupt the system during this process. Please refrain
from pressing any keys on the keyboard, moving the mouse, or interrupting
power to the system. Failure to do so could result in damage to the system
BIOS.

When the computer has finished updating the BIOS, a Flash program
successful. Press any key to reboot prompt appears.
6. Remove the floppy disk and press the “Enter” key.
7. The computer will now restart with the new revision of the BIOS
installed.
The boot screen will indicate the BIOS version.

If you encounter device or resource errors after flashing the system BIOS,
enter the System Setup, clear the NVRAM and restore t

Precisa de ajuda com problemas de BIOS?

Encontre uma solução no guia de uso e solução de problemas de BIOS da Dell.

Ajuda e tutoriais para drivers