Dell SAS 6/iR Adapter, v.00.25.47.00.06.22.03.00 , A04
Reinicialização necessáriaINSTALADO AUTOMATICAMENTEEste arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Este arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
Encontre a melhor opção de download para seu sistema
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistema
Pesquisar no suporte
Digite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto.Mostre-me como
Nenhum resultado encontrado. Não foi possível encontrar resultados para a sua pesquisa. Modifique sua pesquisa e tente novamente.
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema.O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Correções e aprimoramentos
BIOS - 06.22.03.00 NEW FUNCTIONALITY: None. DEFECT FIXES: -Implements a change to allow some RAID1 volumes created with earlier SAS 6/iR FW revisions to be migrated to controllers with this FW revision. - Implements a change to order the controller list based on defined controller type instead of static chip-based references - Updates verify functionality to allow user to escape once Reassign All has been selected and drive is no longer responding. - Removes rescan for devices on any keystroke in view array screen. Rescan will now only be performed on Alt+N keystroke.
FIRMWARE - 00.25.47.00 NEW FUNCTIONALITY: - Modifies coercion of RAID volumes to align with PERC. This facilitates migration of SAS6 RAID volumes to PERC6. DEFECT FIXES: -Implements a change to allow some RAID1 volumes created with earlier SAS 6/iR FW Revisions to be migrated controllers with this FW revision or later. -Improves robustness in handling Task Management events during heavy IO -Implements a change to correct an issue with initialization of interposer attached SATA drives where link to the drive could be left in a state where it was possible that I/Os could be timed out and have to be retried by the host.
A Dell Technologies recomenda aplicar esta atualização durante o próximo ciclo de atualização programado. A atualização contém alterações para manter a integridade geral do sistema. Ela garante que os softwares do sistema fiquem atualizados e compatíveis com outros módulos do sistema (firmware, BIOS, drivers e software) e pode incluir outros recursos novos.
Formato do arquivo:Pacote de atualização para Red Hat Linux
Nome do arquivo:SAS-RAID_Firmware_6T2TK_LN32_00.25.47.00.06.22.03.00_A04.BIN
Tamanho do arquivo:3.65 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Pacotes de atualização da Dell para Linux podem ser usados como a aplicativos autônomos que garantem que critérios de validação específicos sejam atendidos, aplicando em seguida uma atualização. Nota: os pacotes de atualização para Linux são de código aberto. Consulte o arquivo Leiame dos Pacotes de atualização da Dell para Linux para obter detalhes.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
4d4ee10cd8f3ae46527f70a38e17169f
SHA1:
4265f3a8b30dd24f83790d919e306d39c1a3a9ae
SHA-256:
Não disponível
Formato do arquivo:Um arquivo GnuPG que contém uma assinatura de criptografia
Nome do arquivo:SAS-RAID_Firmware_6T2TK_LN32_00.25.47.00.06.22.03.00_A04.BIN.sign
Tamanho do arquivo:194 Bytes
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
A assinatura GnuPG do pacote de atualização para Red Hat Linux pode ser usada para autenticar a identidade da Dell no pacote de atualização para Red Hat Linux correspondente.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
09d199c003966038a643403451616101
SHA1:
960216fb1a68cf23c8e6b5b895696e31a80e85f2
SHA-256:
Não disponível
Formato do arquivo:ZipPack (externo)
Nome do arquivo:DELL_SAS-6-IR-ADAPTER_A04_R197382.exe
Tamanho do arquivo:563.47 KB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este arquivo contém um conjunto compactado (ou zipado) de arquivos. Faça download do arquivo em uma pasta no disco rígido e, em seguida, execute-o (dê dois cliques) para descompactar o conjunto de arquivos. Siga as instruções para concluir a instalação.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
4b11813d93d89a8fe4b925773e0581a2
SHA1:
Não disponível
SHA-256:
Não disponível
Formato do arquivo:Pacote de atualização para MS Windows de 32 bits
Nome do arquivo:SAS-RAID_Firmware_6T2TK_WN32_00.25.47.00.06.22.03.00_A04.EXE
Tamanho do arquivo:5.57 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Pacotes de atualização da Dell (DUP) no formato do Microsoft Windows de 32 bits foram projetados para execução em sistemas operacionais do Microsoft Windows de 64 bits. Pacotes de atualização da Dell (DUP) no formato do Microsoft Windows de 64 bits serão executados apenas nos sistemas operacionais Microsoft Windows de 64 bits. Ao selecionar uma atualização de driver de dispositivo, certifique-se de selecionar uma opção apropriada para seu sistema operacional.
- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details.
- When multiple logical disks are configured on the SAS 6/iR and when viewing the logical disks from RAID Properties of the Ctrl-C BIOS utility, the order in which the logical disks are displayed may be reversed from the order in which they are created. This has no effect on the adapter functionality or boot order of the logical disks.
- When adding a SAS 6/iR controller to a system, either by physically adding an adapter or by enabling the integrated SAS controller in the system BIOS, the new controller may need to be added to the controller boot order in the SAS 6/iR BIOS configuration Utility. At POST, hit CTRL-C to enter the utility and verify or modify the controller boot order.
- Migration of RAID Volumes from SAS 6/iR controllers to PERC6 controllers is supported only for volumes originally created on SAS 6/iR controllers running FW revision 00.25.47.00 or later.
- This version of firmware will not ensure complete compatibility with an older version of the management application. OpenManage 5.5 or greater is recommended.
- It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
- Before updating the SAS controller firmware using the DUP package in a Linux system, it is necessary to upgrade the SAS controller driver. Executing the SAS controller firmware DUP update while running a native Linux driver may cause the system/data volumes on the SAS controller to become inaccessible or Read-Only.
The recommended steps to update the SAS controller using the firmware DUP package on a Linux system to this new software level are as follows: 1.Upgrade the driver 2.Reboot the system 3.Upgrade thefirmware 4.Reboot the system
The problem does not occur if the SAS controller FW is updated from a bootable device (non Linux environment).
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP). 2. Reboot for the new FW take effect 3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares. 4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost) 5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click onthe OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation 1. Copy extracted files to bootable media. 2. Reboot system to bootable media. 3. Execute update.bat to perform flash. 5. After flash is complete, remove bootable media. 4. Reboot system for changes to take effect.
Windows Update Package:
Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download 1. Click the Download Now linkto download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Read over the release information presented by executing the ./FRMW_LX_RXXXXXX.BIN --version command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell. 4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do this once on your system.) 2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.