Não desligue o computador nem o desconecte da fonte de energia durante a atualização do BIOS, pois isso pode prejudicar o computador. Durante a atualização, o computador será reiniciado e você pode ver uma tela preta por um momento.
Antes de atualizar, leia as instruções de instalação e as informações importantes mencionadas abaixo.
Dell Optiplex3010 System BIOS A06
Reinicialização necessária INSTALADO AUTOMATICAMENTE Este arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Dell OptiPlex3010 System BIOS A06
Recomendado
Encontre a melhor opção de download para seu sistema
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistemaPesquisar no suporte
Digite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto. Mostre-me como
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema. O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Correções e aprimoramentos
WARNING: If the Dell Data Protection | Encryption Full Volume Encryption is deployed in the current system, Do Not Update BIOS to this BIOS release.
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
1.Fix Onboard HDMI audio no function if disable CSM in BIOS.
2.Update CPU ucode.
3.Active "Enable USB Wake Support".
4.Show NIC device name rather than "Onboard NIC" in UEFI mode.
5.Fix: The SUT can't boot to the ATA mode UEFI OS with HDD password setting.
Ler maisThis BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
1.Fix Onboard HDMI audio no function if disable CSM in BIOS.
2.Update CPU ucode.
3.Active "Enable USB Wake Support".
4.Show NIC device name rather than "Onboard NIC" in UEFI mode.
5.Fix: The SUT can't boot to the ATA mode UEFI OS with HDD password setting.
Versão
A06, A06
Data da versão
27 out. 2012
Tipo de download
BIOS do sistema
Categoria
BIOS
Importância
RecomendadaA Dell Technologies recomenda aplicar esta atualização durante o próximo ciclo de atualização programado. A atualização contém alterações para manter a integridade geral do sistema. Ela garante que os softwares do sistema fiquem atualizados e compatíveis com outros módulos do sistema (firmware, BIOS, drivers e software) e pode incluir outros recursos novos.
Formatos disponíveis Ver informações importantes
Formato do arquivo: Flash BIOS executável
Nome do arquivo: O3010A06.exe
Tamanho do arquivo: 4.45 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este formato de arquivo consiste em um arquivo executável do BIOS. Para atualizar seu sistema, faça download do arquivo e salve-o na área de trabalho ou no disco rígido. Em seguida, execute o executável. Para atualizar o BIOS, seu sistema precisa de uma fonte CA conectada e o nível de carga da bateria precisa ser de, no mínimo, 10%.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
9b3f2e2e6e180ea577d48be5a4b03f08
SHA1:
b8ad9ee64aec14a2cf8980dd200d9c489d4c460a
SHA-256:
2cd810291afc20c44187a4745874c06f2b25eb3dc591008534f856f9430014f6
Ao fazer o download, você aceita os termos do Contrato de Licença de Software da Dell (em Inglês).
Informações importantes
Upgrading and Downgrading between Currently Released BIOS Images (Pre-Win8 Released BIOS) and Win8 Feature Enhanced BIOS Images (Win8 Released BIOS)
Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 Released BIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.)
Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 Released BIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.)
Aplica-se a
Dell Optiplex 3010
Instruções de instalação
WARNING: If the Dell Data Protection | Encryption Full Volume Encryption is deployed in the current system, Do Not Update BIOS to this BIOS release.
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you doesn't enable BitLocker on your system you can ignore it.
--------------------------------------------------------------------------------
Installation Instructions for the Universal (Windows/ DOS) format
1. Download file to Desktop
2. Use one of the methods below to flash the Bios.
Run the BIOS update utility from Windows environment
Run the BIOS update utility from DOS environment (Non-Windows users)
--------------------------------------------------------------------------------
Download file to Desktop
The file O3010A06.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O3010A06.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will close all applications, shut down Windows, Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
1. Copy the file O3010A06.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O3010A06.exe (where y is the drive letter where the executable is located).
--------------------------------------------------------------------------------
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you doesn't enable BitLocker on your system you can ignore it.
--------------------------------------------------------------------------------
Installation Instructions for the Universal (Windows/ DOS) format
1. Download file to Desktop
2. Use one of the methods below to flash the Bios.
Run the BIOS update utility from Windows environment
Run the BIOS update utility from DOS environment (Non-Windows users)
--------------------------------------------------------------------------------
Download file to Desktop
The file O3010A06.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O3010A06.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will close all applications, shut down Windows, Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
1. Copy the file O3010A06.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O3010A06.exe (where y is the drive letter where the executable is located).
--------------------------------------------------------------------------------
Precisa de ajuda com problemas de BIOS?
Encontre uma solução no guia de uso e solução de problemas de BIOS da Dell.Ajuda e tutoriais para drivers
Para ver mais downloads, vá para Drivers e downloads. Para obter ajuda sobre como usar as informações contidas nesta página, visite Ajuda e tutoriais de driver.