Dell CERC 6/i Integrated FW, v.6.2.0-0013, A11
Reinicialização necessária INSTALADO AUTOMATICAMENTE Este arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Dell PERC6/CERC6 firmware maintenance release version 6.2.0-0013 Performance enhancements include significant improvements in random-write performance, multi-threaded write performance, and reduction in maximum and average I/O response times.
Recomendado
Encontre a melhor opção de download para seu sistema
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistemaPesquisar no suporte
Digite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto. Mostre-me como
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema. O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Correções e aprimoramentos
1. Enhanced disk IO performance in multiple SAS and SATA configurations.
2. Improved random IO performance.
3. Improved response and completion times for random IO.
4. Increased SATA disk command queue depth.
5. Improved disk medium error correction in certain scenarios.
6. Improved handling of faulty backplanes and enclosures.
7. Resolved an issue where a predicted failure was still being reported after that drive was replaced.
8. Corrected an issue where SATA disks in an MD1000 may become foreign after the server and enclosure are power-cycled.
9. Resolved an issue where the controller could not handle a large number of rebuilds under heavy IO stress.
10. Fixed an issue where Windows Server 2008 installation in uEFI mode fails when installing to a virtual disk larger than 2 terabytes.
11. Fixed an issue where some Intel platforms with a PERC 6 installed occasionally fail with Windows Hardware Malfunction blue screen error during OS reboots.
12. Made several cosmetic and usability enhancements to improved customer experience.
Ler mais2. Improved random IO performance.
3. Improved response and completion times for random IO.
4. Increased SATA disk command queue depth.
5. Improved disk medium error correction in certain scenarios.
6. Improved handling of faulty backplanes and enclosures.
7. Resolved an issue where a predicted failure was still being reported after that drive was replaced.
8. Corrected an issue where SATA disks in an MD1000 may become foreign after the server and enclosure are power-cycled.
9. Resolved an issue where the controller could not handle a large number of rebuilds under heavy IO stress.
10. Fixed an issue where Windows Server 2008 installation in uEFI mode fails when installing to a virtual disk larger than 2 terabytes.
11. Fixed an issue where some Intel platforms with a PERC 6 installed occasionally fail with Windows Hardware Malfunction blue screen error during OS reboots.
12. Made several cosmetic and usability enhancements to improved customer experience.
Versão
6.2.0-0013, A11
Data da versão
06 dez. 2011
Tipo de download
Firmware
Categoria
RAID SAS
Importância
RecomendadaA Dell Technologies recomenda aplicar esta atualização durante o próximo ciclo de atualização programado. A atualização contém alterações para manter a integridade geral do sistema. Ela garante que os softwares do sistema fiquem atualizados e compatíveis com outros módulos do sistema (firmware, BIOS, drivers e software) e pode incluir outros recursos novos.
Formatos disponíveis Ver informações importantes
Formato do arquivo: Pacote de atualização para MS Windows de 32 bits
Nome do arquivo: RAID_FRMW_WIN_R216022.EXE
Tamanho do arquivo: 5.95 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Pacotes de atualização da Dell (DUP) no formato do Microsoft Windows de 32 bits foram projetados para execução em sistemas operacionais do Microsoft Windows de 64 bits. Pacotes de atualização da Dell (DUP) no formato do Microsoft Windows de 64 bits serão executados apenas nos sistemas operacionais Microsoft Windows de 64 bits. Ao selecionar uma atualização de driver de dispositivo, certifique-se de selecionar uma opção apropriada para seu sistema operacional.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
112E477AC227DBA02A2CDAF8240C24B4
SHA1:
Não disponível
SHA-256:
Não disponível
Formato do arquivo: Um arquivo GnuPG que contém uma assinatura de criptografia
Nome do arquivo: RAID_FRMW_LX_R216022.BIN.sign
Tamanho do arquivo: 194 Bytes
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
A assinatura GnuPG do pacote de atualização para Red Hat Linux pode ser usada para autenticar a identidade da Dell no pacote de atualização para Red Hat Linux correspondente.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
874E1D2B8086E670730D0873A457644F
SHA1:
Não disponível
SHA-256:
Não disponível
Formato do arquivo: ZipPack (externo)
Nome do arquivo: DELL_CERC-6-I-INTEGRATED_A11_R216022.exe
Tamanho do arquivo: 1.89 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este arquivo contém um conjunto compactado (ou zipado) de arquivos. Faça download do arquivo em uma pasta no disco rígido e, em seguida, execute-o (dê dois cliques) para descompactar o conjunto de arquivos. Siga as instruções para concluir a instalação.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
9308f538082b21e6ae47885ab19d38e5
SHA1:
a04e333bb06e2a48c293708627e4ad7adbc2fbbe
SHA-256:
Não disponível
Formato do arquivo: Notas da versão externas
Nome do arquivo: R216022.txt
Tamanho do arquivo: 14.35 KB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este formato de arquivo contém texto sem formatação, que pode ser visualizado com um editor de texto padrão.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
0b673803acbc8be9ba23125dd3c139c3
SHA1:
Não disponível
SHA-256:
Não disponível
Formato do arquivo: Pacote de atualização para Red Hat Linux
Nome do arquivo: RAID_FRMW_LX_R216022.BIN
Tamanho do arquivo: 4.45 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Pacotes de atualização da Dell para Linux podem ser usados como a aplicativos autônomos que garantem que critérios de validação específicos sejam atendidos, aplicando em seguida uma atualização.
Nota: os pacotes de atualização para Linux são de código aberto. Consulte o arquivo Leiame dos Pacotes de atualização da Dell para Linux para obter detalhes.
Nota: os pacotes de atualização para Linux são de código aberto. Consulte o arquivo Leiame dos Pacotes de atualização da Dell para Linux para obter detalhes.
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5:
6D8A313070F4B739FD73D6462F861A04
SHA1:
Não disponível
SHA-256:
Não disponível
Ao fazer o download, você aceita os termos do Contrato de Licença de Software da Dell (em Inglês).
Informações importantes
1. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification will be translated as "ATA" followed by blanks.
2. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
3. If a virtual disk is configured with write-back cache enabled and some or all of its physical disks are removed from the system or enclosure, the RAID controller will preserve the virtual disk's write cache. The controller will flush the preserved cache when the physical disks are replaced and the foreign configuration is imported. Any attempt to update controller firmware will be blocked when cache is preserved for a virtual disk.
4. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hot spare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hot spare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration to another system, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
6. The controller restricts the importing of virtual disks that are undergoing RAID Level Migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
7. EMM changes or drive migrations are not supported during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline. Dell recommends the user to perform a data backup before starting these operations.
8. This version of firmware will not ensure complete compatibility with an older version of management applications. OpenManage 5.5 or greater is recommended.
9. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
10. Important Information for Update Packages for Microsoft Windows
a. Do not run other applications while executing Dell Update Packages.
b. Do not run storage controller update packages if the controller is in use
by other applications. The firmware upgrade may fail if any of the
RAID controllers in the system are performing I/O background tasks
(consistency checks, background initializations, rebuilds, or
reconstructions). Allow the background tasks to complete before
attempting to upgrade the firmware. Patrol Read tasks will not affect
firmware upgrades.
11. Important Information for Update Packages for Linux
a. Do not run other applications while executing Dell Update Packages.
b. If the following error occurs, "Error while loading shared libraries:
libstdc++.so.5: cannot open shared object file: No such file or
directory", you must install the compatibility libraries. These
libraries can be found on the installation media or online. To install
the compatibility libraries, use the following commands:
"rpm -ih compat-libstdc++-33-3.2.3.-*.i386.rpm" for RHEL 4 or 5
"rpm -ih compat-libstdc++-5.0.7-*.x86_64.rpm" for SLES 10
c. When Update Packages stop abruptly due to a power outage or abnormal
termination, perform the following steps:
- Remove the lock file.
- Type the following command: rm -f /var/lock/.spsetup
- Run the Update Package again to reapply the update.
d. Do not ru
2. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
3. If a virtual disk is configured with write-back cache enabled and some or all of its physical disks are removed from the system or enclosure, the RAID controller will preserve the virtual disk's write cache. The controller will flush the preserved cache when the physical disks are replaced and the foreign configuration is imported. Any attempt to update controller firmware will be blocked when cache is preserved for a virtual disk.
4. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hot spare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hot spare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration to another system, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
6. The controller restricts the importing of virtual disks that are undergoing RAID Level Migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
7. EMM changes or drive migrations are not supported during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline. Dell recommends the user to perform a data backup before starting these operations.
8. This version of firmware will not ensure complete compatibility with an older version of management applications. OpenManage 5.5 or greater is recommended.
9. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
10. Important Information for Update Packages for Microsoft Windows
a. Do not run other applications while executing Dell Update Packages.
b. Do not run storage controller update packages if the controller is in use
by other applications. The firmware upgrade may fail if any of the
RAID controllers in the system are performing I/O background tasks
(consistency checks, background initializations, rebuilds, or
reconstructions). Allow the background tasks to complete before
attempting to upgrade the firmware. Patrol Read tasks will not affect
firmware upgrades.
11. Important Information for Update Packages for Linux
a. Do not run other applications while executing Dell Update Packages.
b. If the following error occurs, "Error while loading shared libraries:
libstdc++.so.5: cannot open shared object file: No such file or
directory", you must install the compatibility libraries. These
libraries can be found on the installation media or online. To install
the compatibility libraries, use the following commands:
"rpm -ih compat-libstdc++-33-3.2.3.-*.i386.rpm" for RHEL 4 or 5
"rpm -ih compat-libstdc++-5.0.7-*.x86_64.rpm" for SLES 10
c. When Update Packages stop abruptly due to a power outage or abnormal
termination, perform the following steps:
- Remove the lock file.
- Type the following command: rm -f /var/lock/.spsetup
- Run the Update Package again to reapply the update.
d. Do not ru
Sistemas operacionais compatíveis
Não aplicável
Aplica-se a
CERC 6/i Integrated
PERC 6/i Integrated Blade
Instruções de instalação
Performing the Firmware Upgrade
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.
Ajuda e tutoriais para drivers
Para ver mais downloads, vá para Drivers e downloads. Para obter ajuda sobre como usar as informações contidas nesta página, visite Ajuda e tutoriais de driver.