INSTALADO AUTOMATICAMENTEEste arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Este arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
====================================================================== Contents ====================================================================== 1. Files included in this package 2. Fixes / Enhancements 3. Important Information 4. Firmware upgrade instructions 5. MD1000 Firmware upgrade instructions
====================================================================== 1. Files included in this package ====================================================================== Included in your firmware package are the following files:
Dual_Controller_MD3000i_N1532-735890-005.dlp : Duplex NVSRAM for MD3000i configured with two controllers Single_Controller_MD3000i_N1532-735890-905.dlp : Simplex NVSRAM for MD3000i configured with a single controller MD3000i_FW_RC_07353964_1532.dlp : RAID Controller Firmware MD1000_A04.bin: MD1000 Firmware
====================================================================== 2. Fixes / Enhancements ====================================================================== 07.35.39.64 ----------- * Added fix to resolve controller reboot due to insertion of foreign physical disk * Improved scheduled I/O timing * Improved controller memory utilization * Added fix to resolve the controller panic issue caused by memory leak * Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time * Added support for Windows Server 2008 R2 SP1
07.35.38.60 -----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays - This support is only for OSes common to both the MD3000 and MD3200 Series arrays - This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems - SLES 10 SP3 - SLES 11 - SLES 11 SP 1 - RHEL 5 SP 4 - RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware Owner's Manual for removal and installation instructions.
====================================================================== 3. Important Information ====================================================================== NOTICE: Prior generation firmware is indicated by version that begins with 06.xx.xx.xx, and the Generation 2 firmware starts with 07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2 firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version, the upgrade is one way only; it is not possible to return to prior generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures being connected to the MD3000i are updated to the latest Dell PowerVault MD1000 EMM Firmware from support.dell.com. Dell PowerVault MD1000 EMM Firmware version A03 is the minimum required firmware level to support connection to the MD3000i array; attaching an MD1000 with unsupported firmware causes an uncertified condition to exist on the array. See the updated Hardware Owner''''s Manual on http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000i system support matrix on support.dell.com prior to connecting MD1000 enclosures to an MD3000i to ensure supported drives and firmware versions are used.
====================================================================== 4. Firmware upgrade instructions ====================================================================== IMPORTANT: It is highly recommended to gather support information from the "Support" tab of the MD Storage Manager prior to performing any firmware upgrade operations. This can also be achieved thro
Recomendado
Encontre a melhor opção de download para seu sistema
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistema
Pesquisar no suporte
Digite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto.Mostre-me como
Nenhum resultado encontrado. Não foi possível encontrar resultados para a sua pesquisa. Modifique sua pesquisa e tente novamente.
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema.O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Correções e aprimoramentos
07.35.39.64 ----------- * Added fix to resolve controller reboot due to insertion of foreign physical disk * Improved scheduled I/O timing * Improved controller memory utilization * Added fix to resolve the controller panic issue caused by memory leak * Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time * Added support for Windows Server 2008 R2 SP1
07.35.38.60 ----------- Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays - This support is only for OSes common to both the MD3000 and MD3200 Series arrays - This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems - SLES 10 SP3 - SLES 11 - SLES 11 SP 1 - RHEL 5 SP 4 - RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware Owner''s Manual for removal and installation instructions.
A Dell Technologies recomenda aplicar esta atualização durante o próximo ciclo de atualização programado. A atualização contém alterações para manter a integridade geral do sistema. Ela garante que os softwares do sistema fiquem atualizados e compatíveis com outros módulos do sistema (firmware, BIOS, drivers e software) e pode incluir outros recursos novos.
Formato do arquivo:Extrai arquivos diretamente no disco local
Nome do arquivo:MD3000i-CFW-NVSRAM_07353964_A13_R315164.zip
Tamanho do arquivo:14.2 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este formato de arquivo consiste em um conjunto de arquivos que podem ser descompactados para um diretório no disco rígido. A instalação pode ser feita por esse diretório.