Adaptec 39160 SCSI - Family Manager Set, v.FMS4.0 SP5, A11
INSTALADO AUTOMATICAMENTEEste arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Este arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
Adaptec 39160/7892/7899 SCSI Controller Driver Set
Recomendado
Encontre a melhor opção de download para seu sistema
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistema
Pesquisar no suporte
Digite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto.Mostre-me como
Nenhum resultado encontrado. Não foi possível encontrar resultados para a sua pesquisa. Modifique sua pesquisa e tente novamente.
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema.O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Correções e aprimoramentos
This driver merges the previous Dell 'Special' code stream and the Adaptec 'Service Pack' code stream - as of this release Dell A11 = Adaptec FMS 4.0 SP5.
S1 - S5: this is a change list/history applicable to the Dell code stream, and is applicable to Windows 2000 only:
S1: Based on Cyrax standard release, added fix for Non-Tag Target Timeout.
S2: Based on S1, added fix for Slow tape performance.
S3: Based on Cyrax standard release, added fix for Slow tape performance.
S4: Based on S2, added fix for Request Sense Timeout in Non-tag code path.
S5: Based on S3
· Clustering certification
· With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer rate, all subsequent I/O transfers occurred as asynchronous speeds.
· Command timeout with Event 9 errors logged in Windows 2000 Event log when using Tape Library.
· Fix for Fast or Multi SCSI ID Tape Library Timeout
· Added fix for Request Sense Timeout in Non-tag code path.
· Command timeout when installing Dell management Software under Windows 2000.
SP1 - SP4: this is a change list/history applicable to the Adaptec Service Pack code stream, and only covers changes made to Windows 2000 or Windows 2003 drivers:
Service Pack 1 Windows 2000: · Fixed Issue: The termination setting for channel B on the AIC-7899 was being set incorrectly. The problem is seen only on motherboards in which the AIC-7899 has been designed to control the termination for channel A and Motherboards that do not use the AIC-7899 to control the termination of the bus will not see this problem. Adaptec host adapters do not exhibit this problem either.
Service Pack 2 Netware fixes only; no Windows 2000 or 2003 changes.
Service Pack 3 Windows 2000: · Fixed Issue: With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer rate, all subsequent IO transfers occurred as Async.
· Tape IO Test certification failure fix.
Service Pack 4 Windows 2000: · Clustering certification
· With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer rate, all subsequent I/O transfers occurred as asynchronous speeds.
· Command timeout with Event 9 errors logged in win2k Event log when using Tape Library.
· Fix for Fast or Multi SCSI ID Tape Library Timeout
A Dell Technologies recomenda analisar esta atualização para determinar se ela é válida para seu sistema. A atualização contém alterações que afetam apenas determinadas configurações ou oferece novos recursos que podem ou não ser válidos para seu ambiente.
Formato do arquivo:Extrai arquivos diretamente no disco local
Nome do arquivo:2k2k3A11.exe
Tamanho do arquivo:145.76 KB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este formato de arquivo consiste em um conjunto de arquivos que podem ser descompactados para um diretório no disco rígido. A instalação pode ser feita por esse diretório.
Download 1. Click Download Now, to download the file. 2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement. 3. When the File Download window appears, click Save and click OK. The Save In: window appears. 4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 5. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Diskette Creation 1. Insert a floppy diskette into the floppy drive. 2. Double-click the new icon on the desktop. The Self-Extractor window appears. 3. Specify the floppy drive as the location to upzip the files. 4. Click on the unzip button to extract files.
IMPORTANT NOTE: If you are running Open Manage Array Manager v3.2 or higher under Windows 2000, to avoid a potential Blue Screen, prior to updating the driver you will need to: 1. Disable the SCSI subsystem provider in the Array Manager Utilities before upgrading the driver. Please refer to the Array Manager documentation for details on how to do this. 2. Once the SCSI provider is disabled, you should then navigate to the \WINNT\SYSTEM32\DRIVERS folder and temporarily rename ASPI32.SYS to ASPI32.XXX, then reboot the system before proceeding with the upgrade. 3. Following the upgrade, you will need to reboot again before re- naming ASPI32.SYS back to its' original name, then finally re-enabling the SCSI provider.
Updating the driver on an Existing Windows 2000/2003 Server
NOTE: You must be logged on as Administrator to perform these steps:
1. From the desktop, right-click the My Computer icon. 2. Left-click Manage. 3. Click Device Manage. 4. Double-click SCSI and RAID Controllers. A List of all currently installed SCSI devices appears. 5. Double-click the appropriate SCSI controller (such as 39160 Controller) - in the case of a dual channel controller, there will be two devices listed (one for each channel). The driver will have to be updated separately for each channel. 6. Select the Driver tab. 7. Select Update Driver. The Update Device Driver Wizard appears. 8. Click Next. 9. Click 'Display a list of known drivers for this device so I can choose a specific driver' 10. Click Next. The Upgrade Device Driver Wizard appears. 11. Click 'Have Disk' button. The 'Install from Disk' dialog appears. 11. Insert the driver diskette created above. 12. Click 'Browse' button Locate File dialog appears 13. Use pull-down box to find floppy drive 14. Double-click on appropriate (WIN2000 or WIN2003) folder ADPU160M.INF should appear in 'File Name' box - if not, select it 15. Click 'Open' button 'Install From Disk' dialog reappears with correct path displayed 16. Click 'OK' Upgrade Device Driver Wizard reappears. 17. Choose appropriate device from list (7892, 7899 or 39160) 18. Click 'Next' 19. Click 'Next' again to confirm choice and upgrade driver 20. Close Wizard by clicking Finish 21. Close Properties Dialog for device. 22. Do not reboot system yet. 23. Repeat steps 5-22 for second channel after Device Manager refreshes. 24. Reboot System to complete upgrade.