Dell PowerConnect 3248, A01
AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Management information bases (MIBs) are a collection of definitions, which
define the properties of the managed object within the device to be
managed. Every managed device keeps a database of values for each of the
definitions written in the MIB. It is not the actual database itself - it
is implementation dependant. Definition of the MIB conforms to the SMI
given in RFC 1155. Internet MIB is given in RFC 1213 sometimes
called the MIB-II
define the properties of the managed object within the device to be
managed. Every managed device keeps a database of values for each of the
definitions written in the MIB. It is not the actual database itself - it
is implementation dependant. Definition of the MIB conforms to the SMI
given in RFC 1155. Internet MIB is given in RFC 1213 sometimes
called the MIB-II
Recommandé
Trouver le meilleur téléchargement pour votre système
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.Rechercher dans le support
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire
Ce pilote n’est pas compatible
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez. Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
1. staPortProtocolMigration OBJECT-TYPE
DESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1)to this object forces this port to transmit RSTP
BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read."
2. staPortAdminEdgePort OBJECT-TYPE
DESCRIPTION
"The administrative value of the Edge
Port parameter. A value of TRUE(1)
indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
3. staPortOperEdgePort OBJECT-TYPE
DESCRIPTION
"The operational value of the Edge Port
parameter. The object
is initialized to the value of
staPortAdminEdgePort and is set
FALSE when a BPDU is received."
4. staPortAdminPointToPoint OBJECT-TYPE
DESCRIPTION "The administrative point-to-
point status of the LAN segment
attached to this port. A value of forceTrue
(0) indicates that this port should always be
treated as if it is connected to a point-to-
point link. A value of forceFalse(1)indicates
that this port should be treated as having a
shared media connection. A value of auto(2)
indicates that this port is considered to
have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the
MAC entity is configured for full duplex operation, either
Through auto-negotiation or by management means."
5. staPortOperPointToPoint OBJECT-TYPE
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
6. staPortLongPathCost OBJECT-TYPE
DESCRIPTION
"The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in 32 bits value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
7. staProtocolType OBJECT-TYPE
DESCRIPTION "The version of Spanning Tree Protocol the bridge is
currently running. The value 'stp(1)' indicates the
Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w and the value 'mstp(3)' indicates the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the protocol become available."
8. staTxHoldCount OBJECT-TYPE
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
9. staPathCostMethod OBJECT-TYPE
DESCRIPTION "Indicates the type of spanning tree path cost mode
Configured on the switch. This mode applies to all
instances of the Spanning tree protocol running on
the switch. When the value of this MIB object is
changed, the path cost of all ports will be
reassigned to the default path cost values
based on the new spanning tree path cost mode and
the ports' speed. When the value of this MIB object
is set to long(2), the staPortLongPathCost MIB
object must be used to retrieve/configure
the spanning tree port path cost as a 32 bit value.
The set
En savoir plusDESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1)to this object forces this port to transmit RSTP
BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read."
2. staPortAdminEdgePort OBJECT-TYPE
DESCRIPTION
"The administrative value of the Edge
Port parameter. A value of TRUE(1)
indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
3. staPortOperEdgePort OBJECT-TYPE
DESCRIPTION
"The operational value of the Edge Port
parameter. The object
is initialized to the value of
staPortAdminEdgePort and is set
FALSE when a BPDU is received."
4. staPortAdminPointToPoint OBJECT-TYPE
DESCRIPTION "The administrative point-to-
point status of the LAN segment
attached to this port. A value of forceTrue
(0) indicates that this port should always be
treated as if it is connected to a point-to-
point link. A value of forceFalse(1)indicates
that this port should be treated as having a
shared media connection. A value of auto(2)
indicates that this port is considered to
have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the
MAC entity is configured for full duplex operation, either
Through auto-negotiation or by management means."
5. staPortOperPointToPoint OBJECT-TYPE
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
6. staPortLongPathCost OBJECT-TYPE
DESCRIPTION
"The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in 32 bits value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
7. staProtocolType OBJECT-TYPE
DESCRIPTION "The version of Spanning Tree Protocol the bridge is
currently running. The value 'stp(1)' indicates the
Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w and the value 'mstp(3)' indicates the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the protocol become available."
8. staTxHoldCount OBJECT-TYPE
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
9. staPathCostMethod OBJECT-TYPE
DESCRIPTION "Indicates the type of spanning tree path cost mode
Configured on the switch. This mode applies to all
instances of the Spanning tree protocol running on
the switch. When the value of this MIB object is
changed, the path cost of all ports will be
reassigned to the default path cost values
based on the new spanning tree path cost mode and
the ports' speed. When the value of this MIB object
is set to long(2), the staPortLongPathCost MIB
object must be used to retrieve/configure
the spanning tree port path cost as a 32 bit value.
The set
Version
A01, A01
Date de publication :
16 juin 2003
Type de téléchargement
Pilote
Catégorie
Réseau
Importance
En optionDell Technologies recommande de consulter cette mise à jour pour déterminer si elle s’applique à votre système. La mise à jour comprend des modifications n’ayant d’impact que sur certaines configurations, ou propose de nouvelles fonctionnalités pouvant s’appliquer ou non à votre environnement.
Formats disponibles
Format de fichier : ZipPack externe
Nom du fichier : R62192.EXE
Taille du fichier : 128.74 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur, puis exécutez-le (double-clic) pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
Non disponible
SHA1 :
Non disponible
SHA-256 :
Non disponible
En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)
Instructions d’installation
Hard Drive Installation (via WinZip) with Setup.exe File for R62192.EXE
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R62192.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\r62192. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\r62192 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.
Hard Drive Installation (via WinZip) with Setup.exe File for R62192.EXE
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R62192.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\r62192. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\r62192 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.
Vous avez besoin d’aide pour résoudre des problèmes de connexion réseau ?
Trouvez une solution dans le guide Dell d’utilisation et de dépannage du réseau.Aide et didacticiels sur les pilotes
Pour plus de téléchargements, accédez à Pilotes et téléchargements. Pour obtenir de l’aide sur l’utilisation des informations affichées sur cette page, consultez la rubrique Aide et didacticiels pour les pilotes.