Seagate Cheetah VI 10K 146LP U320 36GB 68Pin, Cheetah VI 10K 146LP U320 36GB 80Pin, Cheetah VI 10K 146LP U320 73GB 68Pin, Cheetah VI 10K 146LP U320 73GB 80Pin, Cheetah VI 10K 146LP U320 146GB 68Pin, Cheetah VI 10K 146LP U320 146GB 80Pin, v.DS09, A00
AUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
This utility updates the SCSI Seagate Cheetah 10K Drives firmware to DS09. This version addresses compatibility issues when drives are installed in U320 capable PV220/PV221S enclosures and other general quality improvements. The following Seagate drives are supported in this release: Seagate Model # ST3146807LW Seagate Model # ST3146807LC Seagate Model # ST336607LW Seagate Model # ST336607LC Seagate Model # ST373307LW Seagate Model # ST373307LC
Recommandé
Trouver le meilleur téléchargement pour votre système
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.
Rechercher dans le support
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit.Comment faire
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
This version corrects issues found with drives going intermittently Off-line, or a hang condition with drives installed in U320 capable PV220/PV221S systems and introduces other quality improvements.
Dell Technologies recommande vivement d’effectuer cette mise à jour importante dès que possible. La mise à jour contient des correctifs critiques et des modifications permettant d’améliorer le fonctionnement, la fiabilité et la stabilité de votre système Dell. Elle peut également inclure des correctifs de sécurité et d’autres améliorations de fonctionnalités.
Format de fichier :Une ou plusieurs images de disque dans un zip (tous à extraction automatique)
Nom du fichier :BR71432.exe
Taille du fichier :873.65 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur et double-cliquez dessus pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
Utility must be placed on a non-write protected diskette.
NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation 1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set. 2. Insert a blank diskette then click Continue. 3. After all the files have been copied to the last, click Finish.
Installation: NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program
NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.
Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.
If PERC3/xx, PERC4/xx is selected, the user is prompted to select the channel number the drives are connected to:
1)Update Drives connected to Channel 0 of PERC3 ? 2)Update Drives connected to Channel 1 of PERC3 ? 3)Update Drives connected to Channel 2 of PERC3 ? 4)Update Drives connected to Channel 3 of PERC3 ?
Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all target Seagate U320 10K devices found.
Once the update is complete Remove the diskette and reboot the system.