Package du micrologiciel de bloc d’alimentation Emerson de 1 100 W (réf. : 3MJJP)

Redémarrage requis AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
This package provides the new firmware for power supplier and is supported on Emerson 1100W PSU (PN: 3MJJP) running on the Windows and Linux operating systems.
Recommandé

Trouver le meilleur téléchargement pour votre système

Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.

Rechercher dans le support

Saisir votre modèle ou numéro de série Dell

Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire

Ce pilote n’est pas compatible

Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.

Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.

Correctifs et améliorations

Fixes
- eliminates communication error issue

Enhancements
- enhance fan control to improve system startup cooling
En savoir plus

Version

M1.01.09, A02

Date de publication :

09 févr. 2012

Type de téléchargement

Micrologiciels

Catégorie

Alimentation

Importance

Urgent
Dell Technologies recommande vivement d’effectuer cette mise à jour importante dès que possible. La mise à jour contient des correctifs critiques et des modifications permettant d’améliorer le fonctionnement, la fiabilité et la stabilité de votre système Dell. Elle peut également inclure des correctifs de sécurité et d’autres améliorations de fonctionnalités.
Formats disponibles Afficher les informations importantes

Format de fichier : Package de mise à jour pour Microsoft Windows 32 bits
Nom du fichier : Power_Firmware_YRWVK_WN32_M1.01.09_A01.EXE
Taille du fichier : 4.34 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Les packages DUP (Dell Update Packages) au format Microsoft Windows 32 bits ont été conçus pour fonctionner sur les systèmes d’exploitation Microsoft Windows 64 bits. Les packages DUP (Dell Update Packages) au format Microsoft Windows 64 bits fonctionnent uniquement sur les systèmes d’exploitation Microsoft Windows 64 bits. Assurez-vous de choisir la mise à jour de pilote de périphérique adaptée à votre système d’exploitation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
d7c8b05baa3dab9e24fe4db61eb53229
SHA1 :
774996e380fa85d8ca8eb161d458f3dffe9fc8ac
SHA-256 :
297c536b76326975b650acb8692af7ebd57bcfeda12469415a6da73374f8b4fc

Format de fichier : Un fichier GnuPG qui contient une signature cryptographique
Nom du fichier : Power_Firmware_YRWVK_LN32_M1.01.09_A01.BIN.sign
Taille du fichier : 194 Bytes
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
La signature GnuPG pour le progiciel de mise à jour Red Hat Linux peut être utilisée pour authentifier l’identité Dell dans le progiciel de mise à jour Red Hat Linux en corrélation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
83ebabd03c2d92a41e060bcf38e2107b
SHA1 :
4aecb1f2dd6cb09edfb5aed84e3610955307d757
SHA-256 :
167820cb4a382a5a26cd64a63c84c4f10301aa74e0869f80d6248b76c88967d1

Format de fichier : Notes de publication externe
Nom du fichier : Instructions.txt
Taille du fichier : 3.65 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce format de fichier contient du texte brut qui peut être affiché avec un éditeur de texte standard.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
22b60350354f7f41e0500b5fe0978147
SHA1 :
37a23310a882f839d73554c2470437c6049c2b89
SHA-256 :
Non disponible

Format de fichier : Package de mise à jour pour Red Hat Linux
Nom du fichier : Power_Firmware_YRWVK_LN32_M1.01.09_A01.BIN
Taille du fichier : 2.15 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Les progiciels de mise à jour Dell pour Linux peuvent être utilisés comme applications autonomes garantissant que les critères de validation spécifiques sont respectés, appliqués, puis mis à jour.
Remarque : les progiciels de mise à jour pour Linux sont de type Open Source. Pour en savoir plus, reportez-vous au fichier Lisez-moi des progiciels de mise à jour Dell pour Linux.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
5edbb8c2024e07d25b23b22dd073ad32
SHA1 :
d97b110382002ddcf714627e8f1f2e5fef8d9870
SHA-256 :
46860e78c8adfe12116df172cb227049c4a0f7903574e0b51edcf45b6333992a

En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)

Détails supplémentaires

Afficher tout | Masquer tout
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
1100W (3MJJP) PSU
PSU FIRMWARE UPDATE INSTRUCTIONS:

CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.

IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.


Instructions for Power_Firmware_YRWVK_LN32_M1.01.09_A01.BIN:

Download

1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation

1. Read the release information presented by executing the ./Power_Firmware_YRWVK_LN32_M1.01.09_A01.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./Power_Firmware_YRWVK_LN32_M1.01.09_A01.BIN from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.


Instructions for Power_Firmware_YRWVK_WN32_M1.01.09_A01.EXE:

Download

1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.


GnuPG Signature of Dell Update Package Instructions for Power_Firmware_YRWVK_LN32_M1.01.09_A01.BIN.sign:

Download

1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation

1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file, Power_Firmware_YRWVK_LN32_M1.01.09_A01.BIN.sign
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.

Reboot will be required

Aide et didacticiels sur les pilotes