AUTOMATISCH INSTALLIERTDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Adding support of Seagate Cheetah V 36GB hard drives, model number ST336605FC/FCV (Dell p/n 9W190 or K2825), to the PV720/740/760N systems. This zip file contains the qual_devices.txt file (qual device table), the readme.txt file (how to instructions) as well as the tech sheet.
Empfohlen
Den besten Download für Ihr System suchen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.
Support suchen
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein.Anleitung
Keine Ergebnisse gefunden. Wir konnten für Ihre Suchanfrage keine Ergebnisse finden. Bitte ändern Sie Ihre Suche und versuchen Sie es erneut.
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
This release allows a customer to replace existing FC hard drives, model numbers ST318304FC/FCV (Dell p/n 17JTM- 18GB) and ST336704FC/FCV (Dell p/n 50GMD) in PV720/740/760N systems with the Seagate Cheetah V FC hard drive, model number ST336605FC/FCV (Dell p/n 9W190 or K2825) as a hot swap.
Support of the newer Seagate hard drives on PV720/740/760N requires an updated qual device table. This release provides the qual device table and procedure. This procedure assumes that the hard drives have NetApp firmware version NA04.
Dell Technologies empfiehlt, dieses Update zu überprüfen, um festzustellen, ob es für Ihr System gilt. Das Update enthält Änderungen, die sich nur auf bestimmte Konfigurationen auswirken, oder bietet neue Funktionen, die für Ihre Umgebung gelten können aber nicht müssen.
Dateiformat:Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname:700N_qualCV.zip
Dateigröße:139.28 KB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
Once obtained, the qual_devices file should not be opened, edited or saved in a windows format as this corrupts the qual_devices file.
1. From a windows client map to the root directory of the filer: \\\c$\etc
2. Find the qual_devices file and rename to qual_devices1.
3. Place the diskette with the qual_devices file in the Windows client.
4. Drag and drop the qual_devices file from the a: drive to the \\filer\c$\etc directory.
5. Attach the null modem cable from the client to the filer and open a hyper terminal session before moving to step 6.
6. Attach the DAE to the current enclosure via the second port on the LCC module that is currently connected to the filer.
To use hyper terminal with the filer you will need a null modem cable to connect from the COM1 on your Windows client to the Console port on the back of the filer.
To verify that this file worked correctly, open a hyper terminal session using the following settings and view the drive initialization.
Bits per Sec: 9600 Data Bits: default Parity: default Stop bits: default Flow Control: none