Dell PowerVault 224F/660F SES Firmware, v. 1.9.5, A01
AUTOMATISCH INSTALLIERTDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
SES 1.9.5 Test Release Notes
The SES195.bin file is the required file for the download. It is highly recommended that all I/O is stopped before beginning this procedure.
You must update the SES firmware on each LS module in the PowerVault 660 and each of the attached enclosures. This includes the 660F as well as all attached 224F enclosures.
If you are replacing an LS module, or adding new PowerVault 224 units to an existing subsystem, you should update all LS modules with this firmware.
Enclosure services must be online to update the firmware. If enclosure services are offline then restore them to the online state before performing the following procedure.
Empfohlen
Den besten Download für Ihr System suchen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.
Support suchen
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein.Anleitung
Keine Ergebnisse gefunden. Wir konnten für Ihre Suchanfrage keine Ergebnisse finden. Bitte ändern Sie Ihre Suche und versuchen Sie es erneut.
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
Improvements to SES 1.9.5 SES 1.9.5 enhances the communication between SES modules. In the past there were times when thresholds set on the master SES were not copied to the slave SES. In a failover scenario the slave would apply the old values, requiring that the user reset the new thresholds.
SES 1.9.5 enhances reporting so that when an LS module fails, Dell Open Manage Array Manager can report the problem. The LED for the LS module will, as in previous versions, still light when an LS module is in a failed state.
SES 1.9.5 now reports the correct model name of the system, either PV660 or PV224.
In SES 1.3b2, upper warning/critical for LS Module temperature sensors is 45C/55C and for power supply sensors is 55C/65C, which is incorrect. The correct settings are in SES 1.9.5 and are 35C/45C for the LS module temperature sensors and 45C/55C for the power supply.
Dell Technologies empfiehlt, dieses Update zu überprüfen, um festzustellen, ob es für Ihr System gilt. Das Update enthält Änderungen, die sich nur auf bestimmte Konfigurationen auswirken, oder bietet neue Funktionen, die für Ihre Umgebung gelten können aber nicht müssen.
Dateiformat:Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname:SES_195.exe
Dateigröße:115.92 KB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
To update the LS module SES firmware, perform the following steps:
1. Start Array Manager on the host system by clicking Start-- Programs-- Dell OpenManage Applications-- Array Manager-- Array Manager Console.
2. Update the SES firmware on the PowerVault 660F.
a. Click Arrays-- PV660F SubSystem-- Physical Array.
b. Right-click the controller for the subsystem you wish to upgrade and choose Download-- SES Firmware.
c. Select all the enclosure check boxes and click Next.
d. Click Browse and locate the SES195.bin file. Click Next.
e. Click Finish and OK.
NOTE: This process takes about 8 to 9 minutes for each additional LS module in the storage array. If the firmware update does not complete successfully, repeat the process until it does. This issue is not a hardware problem, but a software-timing issue.
f. After download completes, right-click the PV660F subsystem in Array Manager and choose Rescan to update the properties information.
g. Right-click the enclosure in Array Manager, choose Properties, and verify that it is using SES firmware version 1.9.5. If it is not, repeat the download procedure.
h. Physically remove the primary LS module to cause failover.
i. Right-click the PV660F subsystem in Array Manager and choose Rescan to update the properties information.
j. Right-click the enclosure and choose Properties to verify its firmware level is also at version 1.9.5. If it is not, repeat the download procedure.
k. Replace the LS module that you removed. If you have multiple enclosures, you must verify the firmware level on every LS module in the subsystem, one at a time.