No apague la computadora ni la desconecte de la fuente de alimentación mientras se actualiza el BIOS, ya que podría dañarse la computadora. Durante la actualización, la computadora se reiniciará y es posible que vea brevemente una pantalla negra.
Antes de la actualización, lea las instrucciones de instalación y la información importante que se indica a continuación.
Dell OptiPlex System BIOS, A10
INSTALADO AUTOMÁTICAMENTEEste archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Optiplex GX1 / NX1 / GX1p A10 FlashBIOS
Recomendado
Encuentre la mejor descarga para su sistema
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema
Buscar soporte
Ingrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto.Mostrarme cómo
No se encontraron resultados. No pudimos encontrar ningún resultado para la búsqueda. Modifique la búsqueda e inténtelo de nuevo.
Este controlador no es compatible
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Inicie sesión en Windows como administrador para utilizar el escaneo automático. Si ya inició sesión como administrador y ve este mensaje, reinicie el sistema.El administrador de TI administra el sistema y es posible que las funciones sean limitadas.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
The following changes have been made to BIOS revision A09 to create A10.
1. New NIC.ROM to fix booting across Cisco routers. Version .99n.02 2. Updated the copyright to 2001.
Dell Technologies recomienda revisar esta actualización para determinar si corresponde a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formato de archivo:Una o varias imágenes de disco de autoextracción dentro de un .zip de autoextracción
File Name:BGX1_A10.exe
Tamaño del archivo:366 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible
Formato de archivo:Flash BIOS executable
File Name:Gx1_a10.exe
Tamaño del archivo:209.96 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo consiste en un archivo ejecutable de BIOS. Para actualizar su sistema, descargue el archivo y guárdelo en su escritorio o disco duro, luego ejecute el archivo ejecutable. Para actualizar el BIOS, su sistema debe tener alimentación de CA y un nivel de carga de la batería de al menos 10%.
Floppy Creating the disk: NOTE: This procedure requires one blank, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”. 2. Choose “Desktop” as the location. 3. Click “Ok”. 4. After the file has finished copying files, click “Close”. 5. Press the “Windows” + “M” keys at the same time to minimize all the open windows. 6. Find the downloaded file on your Desktop, if it looks like a floppy disk, double-click it and skip to Step 7.
NOTE: If the Security Warning window appears, click “Yes”.
7. Click “Setup”. A DOS Window appears. 8. Press the “Enter” key. 9. Insert the floppy disk into the floppy disk drive and press the “Enter” key. 10. Press the “Y” key to begin copying files. An End of the disk set prompt appears. 11. Press the “Enter” key. 12. Click the “Start” button, click “Run”, and then type a: in the Open box. Click “OK’. The list of files on the floppy disk appears. 13. If there is a readme file in the list, double-click it for additional instructions. 14. Close all open windows and leave the disk in the floppy drive. Skip to the section Flashing the BIOS below
NOTE: If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.
Non-Packaged Creating the disk: NOTE: This procedure requires one blank bootable, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”. 2. Choose “Desktop” as the location. 3. Click “Ok”. 4. After the file has finished copying files, click “Close”. 5. Press the “Windows” + “M” keys at the same time to minimize all the open windows. 6. Insert the blank bootable formatted 3.5-inch floppy disk. 7. Right-click the copy of the file, point to “Send To”, click “3 1/2 Floppy (a)”, and then skip to the section Flashing the BIOS below.
Flashing the BIOS: NOTICE: Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the original version of the BIOS. 1. If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power. 2. Ensure that the Flash BIOS disk is inserted into the floppy disk drive. 3. Click the “Start” button, click “Shut Down”, click “Restart”, and then click “Ok”. The computer should restart and boot to the floppy disk.
NOTE: If the flash BIOS program does not start, and you see only an A:\ prompt, refer to the instructions from the Dell File Library page for the BIOS update or to the Readme.txt instructions. Generally, you will type the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS version A10 on the OptiPlex™ series system.
A Press any key to continue prompt appears. 4. Press the “Enter” key. A Press Y to replace old BIOS with new BIOS prompt appears. 5. Press the “Y” key.
NOTICE: Do not interrupt the system during this process. Please refrain from pressing any keys on the keyboard, moving the mouse, or interrupting power to the system. Failure to do so could result in damage to the system BIOS.
When the computer has finished updating the BIOS, a Flash program successful. Press any key to reboot prompt appears. 6. Remove the floppy disk and press the “Enter” key. 7. The computer will now restart with the new revision of the BIOS installed. The boot screen will indicate the BIOS version.
If you encounter device or resource errors after flashing the system BIOS, enter the System Setup, clear the NVRAM and restore t
¿Necesita ayuda con los problemas de BIOS?
Busque la solución en la Guía de uso y solución de problemas de BIOS de Dell.