Dell iDRAC Monolithic release V1.95
需要重新启动 已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
iDRAC6 V1.95
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。 您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Enhancements:
- Creating a partition from an image failed intermittently with Dell supported 8 GB SD card.
- Cannot create Certificate Signing Request (CSR) with remote and local RACADM.
- Cannot perform firmware update using the Web interface with Internet Explorer 10 browser.
- Cannot upload an SSH public key using command racadm sshpkauth if the key does not end with an "=" or "==" at the end of the key string.
- RAC serial redirect prompts for user credential when cfgSerialConsoleNoAuth is enabled.
- Power monitoring graph is not visible in iDRAC6 Web interface with Internet Explorer 10 browser.
- If the user password has (?) character, access is denied for WSMAN commands.
- In iDRAC6 express configuration console/media tab is listed in the system page. The Console/media tab must not be available in iDRAC6 express configuration.
- If is ON on the management station and Virtual Console is launched, and then if any letter is pressed small case letter isdisplayed. If is OFF and any letter is pressed, then Capital letter is displayed.
- The racadm vmdisconnect command from local and Remote racadm displays an error while disconnecting Remote File Share (RFS) attached media-"Error:No Virtual media devices are currently connected". But the media is connected through RFS before executing the command.
- In the iDRAC Web interface -> System Summary page -> Server Health section, the Power Supplies component health status displays as critical health instead of warning health in the absence of redundant power supply.
- Hardware inventory page in iDRAC Web interface displays information for two Power Supply Units (PSUs) when only one is present.
- Broadcom NIC Firmware Version in the iDRAC Web interface -> System Inventory page is not listing the correct version.
- Lifecycle Controller version is not displayed in the iDRAC Web interface System Summary and System Details pages.
了解详情- Creating a partition from an image failed intermittently with Dell supported 8 GB SD card.
- Cannot create Certificate Signing Request (CSR) with remote and local RACADM.
- Cannot perform firmware update using the Web interface with Internet Explorer 10 browser.
- Cannot upload an SSH public key using command racadm sshpkauth if the key does not end with an "=" or "==" at the end of the key string.
- RAC serial redirect prompts for user credential when cfgSerialConsoleNoAuth is enabled.
- Power monitoring graph is not visible in iDRAC6 Web interface with Internet Explorer 10 browser.
- If the user password has (?) character, access is denied for WSMAN commands.
- In iDRAC6 express configuration console/media tab is listed in the system page. The Console/media tab must not be available in iDRAC6 express configuration.
- If
- The racadm vmdisconnect command from local and Remote racadm displays an error while disconnecting Remote File Share (RFS) attached media-"Error:No Virtual media devices are currently connected". But the media is connected through RFS before executing the command.
- In the iDRAC Web interface -> System Summary page -> Server Health section, the Power Supplies component health status displays as critical health instead of warning health in the absence of redundant power supply.
- Hardware inventory page in iDRAC Web interface displays information for two Power Supply Units (PSUs) when only one is present.
- Broadcom NIC Firmware Version in the iDRAC Web interface -> System Inventory page is not listing the correct version.
- Lifecycle Controller version is not displayed in the iDRAC Web interface System Summary and System Details pages.
版本
1.95, A00
发布日期
21 2月 2013
下载类型
固件
类别
嵌入式服务器管理
重要性
紧急Dell Technologies 强烈建议尽快应用这一重要更新。更新包含重要的错误修复和更改，以提高戴尔系统的功能、可靠性和稳定性。它还可能包括安全修复和其他功能增强功能。
可用格式
文件格式： 面向MS Windows（32位）的更新包
文件名： ESM_Firmware_CMDN0_WN32_1.95_A00.EXE
文件大小： 57.87 MB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
Microsoft Windows 32位格式中的戴尔更新包(DUP)设计为可以在Microsoft Windows 64位操作系统上运行。Microsoft Windows 64位格式中的戴尔更新包(DUP)仅可在Microsoft Windows 64位操作系统上运行。选择设备驱动程序更新时，请务必选择适合您的操作系统的更新。
为确保下载的完整性，请验证校验和值。
MD5：
7365a5f803f4753ea8ff50afcae5f3a8
SHA1：
fbf108ecff8c1228b7825ffbcf7c019dcae1548a
SHA-256：
4e172fd679d3ce3d768dfa5582f55ec44eec9525121365f55a03fce11996adf9
文件格式： 应用程序
文件名： iDRAC6_1.95_A00_FW_IMG.exe
文件大小： 48.94 MB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
应用程序
为确保下载的完整性，请验证校验和值。
MD5：
85a7182437ec160bd5d457891305ed39
SHA1：
ba478d4dffcf8fd16d2e81ebbed3ca0cb92ee433
SHA-256：
a0d9cc92c7e4f7d3b45e75f7b459a7b965fb30f6d37f30fa31da9e8aa355e89a
文件格式： 包含加密签名的GnuPG文件
文件名： ESM_Firmware_CMDN0_LN32_1.95_A00.BIN.sign
文件大小： 194 Bytes
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
Red Hat Linux更新包的GnuPG签名可用于验证戴尔在相关Red Hat Linux更新包中的身份。
为确保下载的完整性，请验证校验和值。
MD5：
d8b40bdc5b49daef7b441c68bd2594bc
SHA1：
e3a54a037ce63bd4ceb954c9b671a3ddc026bc8f
SHA-256：
19f15dc6fd79518ccc0a74a143bb11d4855c44bfcf5abfe9db63902447865e44
文件格式： PDF文件归档，可向客户提供帮助和过程信息
文件名： iDRAC6_1.95_A00_ReleaseNotes.pdf
文件大小： 120.88 KB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
此格式包含一个PDF文件归档，用于向客户提供帮助和过程信息。必须先安装Adobe Acrobat Reader，然后才能查看此归档中的文件。
为确保下载的完整性，请验证校验和值。
MD5：
294eb88f5bbc3fc0638dc426e8191a4a
SHA1：
1241947106f7fed0f511472d77165294f262b314
SHA-256：
c5cf02ffbccfd1a9e52f47d31234e9e7a185b5fe6ed13b196bc6b1b16869f700
文件格式： Red Hat Linux的更新包
文件名： ESM_Firmware_CMDN0_LN32_1.95_A00.BIN
文件大小： 54.52 MB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
适用于Linux 的戴 尔更新包是在 满足特定的标准系统环境下使用的独立应用程序。，然后应用更新。
注意：Linux的更新包是开源的。查看适用于Linux 的戴 尔更新包自述以了解 详情，了解详情。
注意：Linux的更新包是开源的。查看适用于Linux 的戴 尔更新包自述以了解 详情，了解详情。
为确保下载的完整性，请验证校验和值。
MD5：
e2b1115a4e849efd878ec7cbf5430286
SHA1：
3d81671d94f244b80dd007f7dce744fa86cf2f91
SHA-256：
4d97efb58439c9fcae6ceaf93ac688cb71887b50c565c2b20592c83123a71d50
开始下载软件，即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
适用于
iDRAC6
安装说明
Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.