Adaptec PERC2, PERC2/Si, PERC3/Si, PERC3/Di, v.2.8.0.6075, A12
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
This software contains the Windows NT4 driver for the DELL PERC 2, PERC 2/Si, PERC 3/Si, and PERC 3/Di controllers.
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。
您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Fixes/Enhancements
==================
-Filter driver checks Dispatch_Level before calling KeWaitForSingleObject avoid bugcheck 0xB8
-Modified unknown AIF handling to prevent Driver Verifier hang.
-STATUS_INVALID_PARAMETER returned for requests with: Zero-length input buffer size.Invalid input buffer size, i.e. not the size of the expected structure.
Invalid memory address for the input buffer.A null input buffer.
-Deletes perc2hib reference in lower filter list rather than entire filter list via inf.
-Corrected a major entry-point in the filter driver that Windows uses for major Plug-N-Play requests (IRP_MJ_PNP). This entry point was incorrectly passing the request to the next lower device in the device stack.
-Deleted the section that removes the upper and lower filters. This section caused errors to be logged in the setupapi.log in Windows.
-Added support for new vSCSI implementation
了解详情
==================
-Filter driver checks Dispatch_Level before calling KeWaitForSingleObject avoid bugcheck 0xB8
-Modified unknown AIF handling to prevent Driver Verifier hang.
-STATUS_INVALID_PARAMETER returned for requests with: Zero-length input buffer size.Invalid input buffer size, i.e. not the size of the expected structure.
Invalid memory address for the input buffer.A null input buffer.
-Deletes perc2hib reference in lower filter list rather than entire filter list via inf.
-Corrected a major entry-point in the filter driver that Windows uses for major Plug-N-Play requests (IRP_MJ_PNP). This entry point was incorrectly passing the request to the next lower device in the device stack.
-Deleted the section that removes the upper and lower filters. This section caused errors to be logged in the setupapi.log in Windows.
-Added support for new vSCSI implementation
版本
2.8.0.6075, A12
发布日期
14 4月 2004
下载类型
驱动程序
类别
SCSI RAID
重要性
推荐Dell Technologies 建议在下一个计划的更新周期期间应用此更新。更新包含用于维护整体系统运行状况的更改。它可确保系统软件保持最新状态并与其他系统模块（固件、BIOS、驱动程序和软件）兼容，并且可能包括其他新功能。
重要信息
This software code release requires all V2.8 components: firmware,
device driver and management utilities. Using some components from previous
releases may cause some unknown errors.
device driver and management utilities. Using some components from previous
releases may cause some unknown errors.
适用于
PERC3/Di
安装说明
Custom Instructions for nta12drv.exe:
Driver Installation for Windows NT 4.0
==============================================
To perform a fresh installation of the Windows NT device drivers
for the controller, follow these steps:
1. Boot the system using the Windows NT 4.0 CD.
2. When the message: "Setup is inspecting your computer's hardware
configuration" appears, press F6 immediately.
3. The Windows NT 4.0 Setup screen will appear, requesting
input for additional adapters in the system. Press 'S' to
specify an additional adapter.
4. A selection menu will appear. Scroll to "Other" and hit
ENTER.
5. Insert the driver diskette and press ENTER when prompted.
6. The selection:
"DELL PERC 2, 2/Si, 3/Si, 3/Di RAID CONTROLLERS"
will appear, hit ENTER.
7. After the driver has loaded, press ENTER to continue the installation.
NOTE: Before you perform the upgrade, uninstall the
Controller Management Software (FAST and the CLI).
See the installation guide associated with your
controller for instructions on how to uninstall the
Controller Management Software.
To upgrade the Windows NT device drivers for the controller,
follow these steps:
1. Follow this path from Start:
Start -> Settings -> Control Panel -> SCSI Adapters -> Drivers
2. Click on 'ADD' in the Driver window.
3. The system displays an "Install Driver" window.
Select "Have Disk".
4. The system displays an "Install From Disk" window.
The "Install Driver" window instructs you to insert
the manufacturer's installation media into the drive
and click < Ok>. In this case, insert the diskette
that contains the NT device drivers for your
controller
5. Enter the drive and location of the files. The
default location on the diskette that contains the NT
device drivers is: "a:\".
The system displays a message identifying the
controller for which you want to upgrade the Windows
NT device drivers. The message requests that you
click the button.
6. The system displays "System Settings Change" and asks
if you want to restart the computer. Press YES.
Driver Installation for Windows NT 4.0
==============================================
To perform a fresh installation of the Windows NT device drivers
for the controller, follow these steps:
1. Boot the system using the Windows NT 4.0 CD.
2. When the message: "Setup is inspecting your computer's hardware
configuration" appears, press F6 immediately.
3. The Windows NT 4.0 Setup screen will appear, requesting
input for additional adapters in the system. Press 'S' to
specify an additional adapter.
4. A selection menu will appear. Scroll to "Other" and hit
ENTER.
5. Insert the driver diskette and press ENTER when prompted.
6. The selection:
"DELL PERC 2, 2/Si, 3/Si, 3/Di RAID CONTROLLERS"
will appear, hit ENTER.
7. After the driver has loaded, press ENTER to continue the installation.
NOTE: Before you perform the upgrade, uninstall the
Controller Management Software (FAST and the CLI).
See the installation guide associated with your
controller for instructions on how to uninstall the
Controller Management Software.
To upgrade the Windows NT device drivers for the controller,
follow these steps:
1. Follow this path from Start:
Start -> Settings -> Control Panel -> SCSI Adapters -> Drivers
2. Click on 'ADD' in the Driver window.
3. The system displays an "Install Driver" window.
Select "Have Disk".
4. The system displays an "Install From Disk" window.
The "Install Driver" window instructs you to insert
the manufacturer's installation media into the drive
and click < Ok>. In this case, insert the diskette
that contains the NT device drivers for your
controller
5. Enter the drive and location of the files. The
default location on the diskette that contains the NT
device drivers is: "a:\".
The system displays a message identifying the
controller for which you want to upgrade the Windows
NT device drivers. The message requests that you
click the button.
6. The system displays "System Settings Change" and asks
if you want to restart the computer. Press YES.