Dell 180AS/2160AS Analog KVM Switch, v.1.0.3.3, A00
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
Updated firmware for the 180AS and 2160AS analog KVM switches and the supporting Server Interface Pods (SIPs).
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Enhancement to enable recognition of PowerEdge M1000e blade server CMC module.
了解详情版本
1.0.3.3, A00
发布日期
06 4月 2009
下载类型
固件
类别
设备固件
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改,或者提供不一定不适用于您的环境的新功能。
180AS/2160AS Analog KVM Switch
Instructions for Dell_180AS-2160AS-Analog-KVM_A00_R173924.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
To upgrade firmware:
1. Connect the standard serial cable to a COM port on the server and to the serial connector on the back panel of the switch. Make a note of which COM port you have chosen, then turn on the switch.
2. Double-click to run the file WUpDateDELL.exe.
3. In the dialog box that displays, select the desired language and COM port.
4. Click Load. The update begins.
5. Once the firmware is updated, the following message displays: Download complete. Click Done to exit the dialog box.
6. The switch automatically reboots after the upgrade is completed.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
To upgrade firmware:
1. Connect the standard serial cable to a COM port on the server and to the serial connector on the back panel of the switch. Make a note of which COM port you have chosen, then turn on the switch.
2. Double-click to run the file WUpDateDELL.exe.
3. In the dialog box that displays, select the desired language and COM port.
4. Click Load. The update begins.
5. Once the firmware is updated, the following message displays: Download complete. Click Done to exit the dialog box.
6. The switch automatically reboots after the upgrade is completed.