SAS_SATA DRIVE DOS FIRMWARE UPDATE A34
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
This is a general maintenance release for SAS and SATA drives. It is a re-release of the previous version with additional firmware updates.
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Fixes/Enhancements:
The Hitachi SAS release for 15K 3.5" SAS hard drive firmware to fix Linux install hang in a RAID-0 config.
During a Linux install small block sequential writes occur which brings out this bug and result in a hang
during install when attached to SAS-5/iR running in RAID 0. The firmware will rev from A48B to A5F0.
了解详情The Hitachi SAS release for 15K 3.5" SAS hard drive firmware to fix Linux install hang in a RAID-0 config.
During a Linux install small block sequential writes occur which brings out this bug and result in a hang
during install when attached to SAS-5/iR running in RAID 0. The firmware will rev from A48B to A5F0.
版本
A5F0, A34
发布日期
04 1月 2012
下载类型
实用程序
类别
SAS驱动器
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改,或者提供不一定不适用于您的环境的新功能。
文件格式: 外部版本说明
文件名: Release Notes A34.txt
文件大小: 64.42 KB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
此文件格式包含纯文本,您可以采用标准文本编辑器进行查看。
为确保下载的完整性,请验证校验和值。
MD5:
7c4a7fbc304d85f87b0fe520f4ce66c1
SHA1:
df28e58751582864db19d897364c043580b7cc0f
SHA-256:
不提供
文件格式: 外置ZipPack
文件名: SAS_SATA_A34_ZPE.exe
文件大小: 84.17 MB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
此文件包含一组压缩文件。将文件下载到硬盘上的文件夹中,然后运行(双击)它来解压这组文件。请按照说明完成安装。
为确保下载的完整性,请验证校验和值。
MD5:
5a0fcf59e80be4fa617e7f2b1357185a
SHA1:
315af2a978cd8b168b80ddee50354eb751bb7a64
SHA-256:
c251df4c24779a2ccef3117cac262aeb711ce566f9af8d0f3ede0ffc77b0dad3
开始下载软件,即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
This release is intended for use on drives attached to SAS/ PERC controllers and MD1000, MD1120, MD1200 and MD1220 Enclosures. To update drives attached to MD3000 and MD3000i enclosures, use R310916"
Please note: Only Dell Branded SAS/SCSI, PERC and embedded ICH controllers are supported.
On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
Please note: Only Dell Branded SAS/SCSI, PERC and embedded ICH controllers are supported.
On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
Dell SAS/SATA Hard Drive
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Detailed Instructions
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Detailed Instructions
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.