Dell BMC Firmware Update
需要重新启动 已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
This package provides the driver for Dell BMC Firmware Update and is supported on Enterprise Servers and Powervault models that are running the following Operating System: NA.
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。 您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Fixes
- Fixed system error status is shown in IT Assistant when hard drives are installed.
- When using ipmitool to send a chassis reset command, response is not received by ipmitool.
Enhancements
- N/A
了解详情- Fixed system error status is shown in IT Assistant when hard drives are installed.
- When using ipmitool to send a chassis reset command, response is not received by ipmitool.
Enhancements
- N/A
版本
1.83, A05
发布日期
23 12月 2013
下载类型
固件
类别
嵌入式服务器管理
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改，或者提供不一定不适用于您的环境的新功能。
可用格式 查看重要信息
文件格式： 面向MS Windows（32位）的更新包
文件名： BMC_FRMW_WIN_R219072.EXE
文件大小： 4.51 MB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
Microsoft Windows 32位格式中的戴尔更新包(DUP)设计为可以在Microsoft Windows 64位操作系统上运行。Microsoft Windows 64位格式中的戴尔更新包(DUP)仅可在Microsoft Windows 64位操作系统上运行。选择设备驱动程序更新时，请务必选择适合您的操作系统的更新。
为确保下载的完整性，请验证校验和值。
MD5：
3858D067398FE0CB94CA461D57871587
SHA1：
不提供
SHA-256：
不提供
文件格式： 包含加密签名的GnuPG文件
文件名： BMC_FRMW_LX_R219072.BIN.sign
文件大小： 194 Bytes
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
Red Hat Linux更新包的GnuPG签名可用于验证戴尔在相关Red Hat Linux更新包中的身份。
为确保下载的完整性，请验证校验和值。
MD5：
F64EC40E476F7414DFB7B6DD684F033E
SHA1：
不提供
SHA-256：
不提供
文件格式： 将文件直接解压到本地磁盘
文件名： PE840BmcA05.exe
文件大小： 270.5 KB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
此文件格式的一个文件存档，可以解压到硬盘上的某个目录中。然后可以从该目录完成安装。
为确保下载的完整性，请验证校验和值。
MD5：
1ae64f8d55badf7c649932054d868aba
SHA1：
不提供
SHA-256：
不提供
文件格式： Red Hat Linux的更新包
文件名： BMC_FRMW_LX_R219072.BIN
文件大小： 3.63 MB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
适用于Linux 的戴 尔更新包是在 满足特定的标准系统环境下使用的独立应用程序。，然后应用更新。
注意：Linux的更新包是开源的。查看适用于Linux 的戴 尔更新包自述以了解 详情，了解详情。
注意：Linux的更新包是开源的。查看适用于Linux 的戴 尔更新包自述以了解 详情，了解详情。
为确保下载的完整性，请验证校验和值。
MD5：
07E93DAA6D2D16759266ED334F86C558
SHA1：
不提供
SHA-256：
不提供
开始下载软件，即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
重要信息
Important Information for Update Packages for Microsoft Windows
1. Do not run other applications while executing Dell Update Packages.
2.When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
3. To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
4. When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source ""IPMIDRV"" with Event ID 1004 are logged in the System Log in the Event Viewer console.
5. These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
6. For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
Important Information for Update Packages for Linux
1. Do not run other applications while executing Dell Update Packages.
2. If the following error occurs, ""Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"", you must install the compatibility libraries from ""www.redhat.com"" or from the Red Hat CD. To install the compatibility libraries, use the following command: ""RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm""
3. Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at ""support.dell.com"".
1. Do not run other applications while executing Dell Update Packages.
2.When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
3. To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
4. When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source ""IPMIDRV"" with Event ID 1004 are logged in the System Log in the Event Viewer console.
5. These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
6. For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
Important Information for Update Packages for Linux
1. Do not run other applications while executing Dell Update Packages.
2. If the following error occurs, ""Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"", you must install the compatibility libraries from ""www.redhat.com"" or from the Red Hat CD. To install the compatibility libraries, use the following command: ""RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm""
3. Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at ""support.dell.com"".
适用于
BMC Firmware
安装说明
Dell Update Package Instructions
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (File Extractions Only) Instructions
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (File Extractions Only) Instructions
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.