Dell MD3000i单控制器更换实用程序, A02
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
MD3000i Single Controller Replacement Utility: This utility updates the firmware and NVSRAM of a replacement controller for an MD3000i in single controller configuration to match the version on the array.
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Provides support for second generation firmware.
Additionally, a serial cable is no longer required to use the utility.
了解详情Additionally, a serial cable is no longer required to use the utility.
版本
A02, A02
发布日期
19 12月 2008
下载类型
实用程序
类别
系统实用程序
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改,或者提供不一定不适用于您的环境的新功能。
Custom Instructions for SCRUtilityA02.zip:
The utility can be run from any computer with access to the management port of the storage array by following these steps:
1. Extract all files and folders from the utility .zip file to a temporary location.
2. Navigate to the location of the extracted files.
If you are using a Windows system, run the simplex.bat file.
If you are using a Linux system, execute the simplex.sh file.
A GUI-based wizard will guide you through the remaining steps necessary to update the controller.
3. When the wizard completes, click Finish.
The utility can be run from any computer with access to the management port of the storage array by following these steps:
1. Extract all files and folders from the utility .zip file to a temporary location.
2. Navigate to the location of the extracted files.
If you are using a Windows system, run the simplex.bat file.
If you are using a Linux system, execute the simplex.sh file.
A GUI-based wizard will guide you through the remaining steps necessary to update the controller.
3. When the wizard completes, click Finish.