英特尔快速存储技术9.5, v.9.5.0.1037, A00
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Initial Release
了解详情版本
9.5.0.1037, A00
发布日期
08 1月 2010
下载类型
驱动程序
类别
存储设备
重要性
推荐Dell Technologies 建议在下一个计划的更新周期期间应用此更新。更新包含用于维护整体系统运行状况的更改。它可确保系统软件保持最新状态并与其他系统模块(固件、BIOS、驱动程序和软件)兼容,并且可能包括其他新功能。
For per-installation using F6 method only:
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.
* Note: For Windows 7 you can use a floppy, CD/DVD or USB.
3. For Windows 7:
- During the operating system installation, after selecting the
location to install Windows 7, click Load Driver to install a third
party SCSI or RAID driver.
- Continue to step 4.
4. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.
5. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.
6. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
7. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.
* Note: For Windows 7 you can use a floppy, CD/DVD or USB.
3. For Windows 7:
- During the operating system installation, after selecting the
location to install Windows 7, click Load Driver to install a third
party SCSI or RAID driver.
- Continue to step 4.
4. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.
5. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.
6. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
7. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
Windows 7, 64-bit