LSI Logic PERC 4/DC, v.351S, A05
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
Dell PowerEdge RAID Controller 4/DC firmware and update script for for IA-64 based platforms. The update script runs under EFI.
Version: 351S
Version: 351S
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。 您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Current Firmware - 351S
(Previous - 350O)
Current BIOS - 1.10
(Previous - 1.09)
Current Ctrl-M - U827
(Previous - U821)
Current Boot Block - 1.7.7Dell
(Previous - 1.7.6Dell)
Fixes
1. Fixed an issue that optimized cache flush algorithms while switching between no read-ahead to read-ahead cache modes.
2. Modified the Fast Initialization function to delete all operation system partition table information.
3. Fixed an issue where a Seagate hard drive model M3637 was not negotiating correctly with PERC 4 adapters.
4. Fixed a SES Timeout error caused by a media error recovery defect in cluster mode on a PERC4/DC and a PERC3/DC.
5. Modified Ctrl-M to clear physical drive media error count upon drive replacement.
Note: System must be powered on during the drive replacement in order for media errors to be cleared.
6. Modified caching algorithms to not switch from Write-back to Write-through during a battery fast charge.
7. Fixed a performance degradation issue when using RAID 10 virtual disks, when configured to use no read ahead or write caching and direct IO on PERC4 controllers.
Enhancements
1. Added Patrol Read feature. Patrol Read involves the review of the system for possible hard drive errors that could lead to drive failure, then action to correct the errors. The goal is to protect data integrity by detecting physical drive failures before the failures can damage data. Patrol Read adjusts the amount of RAID controller resources dedicated to Patrol Read operations based on outstanding disk I/O.
2. Added Rebuild Checkpoint feature. The Dell PERC firmware has a feature to resume a rebuild on a physical drive in case of an abrupt power loss or if the server rebooted in the middle of a rebuild operation.
3. Enhanced write algorithms to increase I/O performance for RAID 5 and RAID 50 virtual disks using four or more disks that are configured to use write-through write cache mode.
Firmware upgrade while controller is doing background I/O task:
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task. (ie. check consistency, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. Current RAID configuration will not be modified or cleared during the Firmware Upgrade process.
了解详情(Previous - 350O)
Current BIOS - 1.10
(Previous - 1.09)
Current Ctrl-M - U827
(Previous - U821)
Current Boot Block - 1.7.7Dell
(Previous - 1.7.6Dell)
Fixes
1. Fixed an issue that optimized cache flush algorithms while switching between no read-ahead to read-ahead cache modes.
2. Modified the Fast Initialization function to delete all operation system partition table information.
3. Fixed an issue where a Seagate hard drive model M3637 was not negotiating correctly with PERC 4 adapters.
4. Fixed a SES Timeout error caused by a media error recovery defect in cluster mode on a PERC4/DC and a PERC3/DC.
5. Modified Ctrl-M to clear physical drive media error count upon drive replacement.
Note: System must be powered on during the drive replacement in order for media errors to be cleared.
6. Modified caching algorithms to not switch from Write-back to Write-through during a battery fast charge.
7. Fixed a performance degradation issue when using RAID 10 virtual disks, when configured to use no read ahead or write caching and direct IO on PERC4 controllers.
Enhancements
1. Added Patrol Read feature. Patrol Read involves the review of the system for possible hard drive errors that could lead to drive failure, then action to correct the errors. The goal is to protect data integrity by detecting physical drive failures before the failures can damage data. Patrol Read adjusts the amount of RAID controller resources dedicated to Patrol Read operations based on outstanding disk I/O.
2. Added Rebuild Checkpoint feature. The Dell PERC firmware has a feature to resume a rebuild on a physical drive in case of an abrupt power loss or if the server rebooted in the middle of a rebuild operation.
3. Enhanced write algorithms to increase I/O performance for RAID 5 and RAID 50 virtual disks using four or more disks that are configured to use write-through write cache mode.
Firmware upgrade while controller is doing background I/O task:
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task. (ie. check consistency, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. Current RAID configuration will not be modified or cleared during the Firmware Upgrade process.
版本
351S, A05
发布日期
07 6月 2005
下载类型
固件
类别
SCSI RAID
重要性
推荐Dell Technologies 建议在下一个计划的更新周期期间应用此更新。更新包含用于维护整体系统运行状况的更改。它可确保系统软件保持最新状态并与其他系统模块（固件、BIOS、驱动程序和软件）兼容，并且可能包括其他新功能。
可用格式
文件格式： 外置ZipPack
文件名： R101840.EXE
文件大小： 985.68 KB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
此文件包含一组压缩文件。将文件下载到硬盘上的文件夹中，然后运行（双击）它来解压这组文件。请按照说明完成安装。
为确保下载的完整性，请验证校验和值。
MD5：
不提供
SHA1：
不提供
SHA-256：
不提供
文件格式： 外部版本说明
文件名： perc4dc-IA64-351S-A05.txt
文件大小： 5.69 KB
这是一个大文件。根据您的连接速度，可能需要一些时间来下载。
格式说明:
开始下载软件，即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
受支持的操作系统
Red Hat® Enterprise Linux 3
Red Hat® Enterprise Linux 4
Windows Server 2003
适用于
PERC 4/DC
安装说明
Instructions for R101840.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
To update the firmware for your PERC 4/DC adapter, perform the following steps:
1. Extract the contents of the firmware package to your hardrive.
2. Copy the contents of the package to a formatted floppy disk, USB key, or CD-ROM.
3. Power on the server. From the EFI Boot Manager Menu, select EFI Shell.
4. Insert the media which contains the firmware update files from step 2.
This may be a USB key, floppy diskette (a USB floppy drive may be used), or CD-ROM.
5. At the Shell> prompt, type 'map -r' to view all mounted devices. Locate the device which contains the firmware update files - it will be enumerated as fs0, fs1, ect.
6. To change to the proper device, type 'fs1:'
NOTE: Your device may have a different file system number.
7. From the fs1:> prompt type 'percupd.nsh' to initiate the firmware update.
8. Follow the instructions from the EFI update tool to complete the firmware upgrade.
9. You will need to restart your system for the new firmware to take effect.
Custom Instructions for perc4dc-IA64-351S-A05.txt:
Download the readme file to view information about this release.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
To update the firmware for your PERC 4/DC adapter, perform the following steps:
1. Extract the contents of the firmware package to your hardrive.
2. Copy the contents of the package to a formatted floppy disk, USB key, or CD-ROM.
3. Power on the server. From the EFI Boot Manager Menu, select EFI Shell.
4. Insert the media which contains the firmware update files from step 2.
This may be a USB key, floppy diskette (a USB floppy drive may be used), or CD-ROM.
5. At the Shell> prompt, type 'map -r' to view all mounted devices. Locate the device which contains the firmware update files - it will be enumerated as fs0, fs1, ect.
6. To change to the proper device, type 'fs1:'
NOTE: Your device may have a different file system number.
7. From the fs1:> prompt type 'percupd.nsh' to initiate the firmware update.
8. Follow the instructions from the EFI update tool to complete the firmware upgrade.
9. You will need to restart your system for the new firmware to take effect.
Custom Instructions for perc4dc-IA64-351S-A05.txt:
Download the readme file to view information about this release.