更新 BIOS 时请勿关闭计算机或拔下电源,否则可能会损害您的计算机。在更新过程中,您的计算机将重新启动,并且可能会出现短暂黑屏。
在更新之前,请阅读下面注明的安装说明和重要信息。
Dell Server System BIOS, v.B113, A04
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
PowerEdge 7150, BIOS, A04
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
System: Dell(TM) PowerEdge(TM) 7150
Version: A04
Release Date: 06/25/02
Major BIOS Component Versions:
Intel BIOS Version : B113
PAL_A Version : 6.6.23
PAL_B Version : 7.7.28 (NEW)
MSL Reference SAL Code : 6.0 RC9
SAL Specification Rev : 3.0
MSL Reference EFI Code : 12.40
EFI Specification Rev : 1.02
FPSWA Driver Version : 1.9
S460AC4.RCV Version : 10
BMC Firmware : BMC28
Backplane Firmware : 21
SCSI BIOS Ver. : 7.31
VGA Ver. : rkt5cx.201 v611
rgxl1328 (supports both)
UNDI16 ROM (LSA.BIN) : Boot Agent Version 4.0.20
IBA 4.0.20 Slot 0000
PXE 2.1 Build 083 (WfM 2.0)
RPL V2.73.
The following changes have been made to BIOS version A03 to create A04:
1. Intel(R) BIOS has been updated to B113.
了解详情Version: A04
Release Date: 06/25/02
Major BIOS Component Versions:
Intel BIOS Version : B113
PAL_A Version : 6.6.23
PAL_B Version : 7.7.28 (NEW)
MSL Reference SAL Code : 6.0 RC9
SAL Specification Rev : 3.0
MSL Reference EFI Code : 12.40
EFI Specification Rev : 1.02
FPSWA Driver Version : 1.9
S460AC4.RCV Version : 10
BMC Firmware : BMC28
Backplane Firmware : 21
SCSI BIOS Ver. : 7.31
VGA Ver. : rkt5cx.201 v611
rgxl1328 (supports both)
UNDI16 ROM (LSA.BIN) : Boot Agent Version 4.0.20
IBA 4.0.20 Slot 0000
PXE 2.1 Build 083 (WfM 2.0)
RPL V2.73.
The following changes have been made to BIOS version A03 to create A04:
1. Intel(R) BIOS has been updated to B113.
版本
B113, A04
发布日期
09 8月 2002
下载类型
系统 BIOS
类别
BIOS
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改,或者提供不一定不适用于您的环境的新功能。
文件格式: 外置ZipPack
文件名: PE7150_BIOS_RCV_A04.exe
文件大小: 2.46 MB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
此文件包含一组压缩文件。将文件下载到硬盘上的文件夹中,然后运行(双击)它来解压这组文件。请按照说明完成安装。
为确保下载的完整性,请验证校验和值。
MD5:
不提供
SHA1:
不提供
SHA-256:
不提供
文件格式: 自解压文件(供64位计算机使用)
文件名: PE7150_BIOS_A04.efi
文件大小: 4.8 MB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
此文件包含可以从EFI外壳或EFI引导管理器执行的压缩内容。将文件下载到可移动介质设备上的EFI分区。插入可移动介质,然后重新启动系统,并从EFI外壳或EFI引导管理器运行该程序。
为确保下载的完整性,请验证校验和值。
MD5:
不提供
SHA1:
不提供
SHA-256:
不提供
文件格式: 文本文件归档,可向客户提供帮助和过程信息
文件名: PE7150_BIOS_A04_RLSN.exe
文件大小: 35.11 KB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
开始下载软件,即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
BIOS
Server System BIOS
Install Instructions for PE7150_BIOS_A04.efi:
PowerEdge 7150 BIOS Update Procedure:
1) Download PE7150_BIOS_A04.efi to the root directory of a
formatted LS-120 floppy disk or root directory of the hard drive on the
PowerEdge 7150 system.
2) Follow "Recovery_Instructions" section for BIOS recovery, or
3) For BIOS update, please insert the LS-120 floppy disk created
from 1) into LS-120 drive of the PowerEdge 7150 system
4) Reboot the PowerEdge 7150 system
5) Select Utilities from Dell EFI Boot Manager menu then press
ENTER
6) Select BIOS Update from Utilities menu and press ENTER.
7) Select PE7150_BIOS_A04 from the menu and press ENTER
8) Dell Unpack Utility will execute. The program will ask
questions, and give instructions based on the answers to the questions.
Follow the instructions to complete the BIOS update process.
9) Once the BIOS and Firwmare update process is complete, the
system display a message instructing the user to press any key to reset
the system.
PowerEdge 7150 BIOS Recovery Procedure
1) Download PE7150_BIOS_RCV_A04.exe to a directory on your hard
drive.
2) Format a LS-120 disk
3) Execute the downloaded file and extract to the freshly
formatted LS-120 disk.
4) Unplug the power cable(s) for the PowerEdge 7150 server
5) Place the jumper on the Legacy I/O card for bootblock recovery
6) Replace the power cable(s)
7) Place disk in LS-120 drive.
8) Turn PowerEdge 7150 system on
9) Wait until until the front-panel LCD displays "BIOS RECOVERY
COMPLETE", approximately 10 minutes.
10) Remove the LS-120 disk
11) Power down the system
12) Unplug the power cable(s)
13) Remove the bootblock jumper
14) Replace the power cable(s)
15) Use the following push button combination to clear the CMOS:
a. Wait for a while (10 seconds) after power off the
system.
b. Press Reset button first, and hold it for a while
(5 seconds).
c. Press the Power button while holding the Reset
button, and release both at the same time
Note: This procedure does not clear the password.
16) Enter BIOS Setup Utility(press F2 key when prompt) and set
the date and time to current date and time. Save the settings. System
will automatically reboot.
Install instruction for self-extracting customer release note:
1) Download PE7150_BIOS_A04_RLSN.exe to a directory on your hard
drive.
2) Execute the downloaded file and extract the two .txt files to
the hard drive.
PowerEdge 7150 BIOS Update Procedure:
1) Download PE7150_BIOS_A04.efi to the root directory of a
formatted LS-120 floppy disk or root directory of the hard drive on the
PowerEdge 7150 system.
2) Follow "Recovery_Instructions" section for BIOS recovery, or
3) For BIOS update, please insert the LS-120 floppy disk created
from 1) into LS-120 drive of the PowerEdge 7150 system
4) Reboot the PowerEdge 7150 system
5) Select Utilities from Dell EFI Boot Manager menu then press
ENTER
6) Select BIOS Update from Utilities menu and press ENTER.
7) Select PE7150_BIOS_A04 from the menu and press ENTER
8) Dell Unpack Utility will execute. The program will ask
questions, and give instructions based on the answers to the questions.
Follow the instructions to complete the BIOS update process.
9) Once the BIOS and Firwmare update process is complete, the
system display a message instructing the user to press any key to reset
the system.
PowerEdge 7150 BIOS Recovery Procedure
1) Download PE7150_BIOS_RCV_A04.exe to a directory on your hard
drive.
2) Format a LS-120 disk
3) Execute the downloaded file and extract to the freshly
formatted LS-120 disk.
4) Unplug the power cable(s) for the PowerEdge 7150 server
5) Place the jumper on the Legacy I/O card for bootblock recovery
6) Replace the power cable(s)
7) Place disk in LS-120 drive.
8) Turn PowerEdge 7150 system on
9) Wait until until the front-panel LCD displays "BIOS RECOVERY
COMPLETE", approximately 10 minutes.
10) Remove the LS-120 disk
11) Power down the system
12) Unplug the power cable(s)
13) Remove the bootblock jumper
14) Replace the power cable(s)
15) Use the following push button combination to clear the CMOS:
a. Wait for a while (10 seconds) after power off the
system.
b. Press Reset button first, and hold it for a while
(5 seconds).
c. Press the Power button while holding the Reset
button, and release both at the same time
Note: This procedure does not clear the password.
16) Enter BIOS Setup Utility(press F2 key when prompt) and set
the date and time to current date and time. Save the settings. System
will automatically reboot.
Install instruction for self-extracting customer release note:
1) Download PE7150_BIOS_A04_RLSN.exe to a directory on your hard
drive.
2) Execute the downloaded file and extract the two .txt files to
the hard drive.