更新 BIOS 时请勿关闭计算机或拔下电源,否则可能会损害您的计算机。在更新过程中,您的计算机将重新启动,并且可能会出现短暂黑屏。
在更新之前,请阅读下面注明的安装说明和重要信息。
Dell OptiPlex System BIOS, A06
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
Optiplex GX50 A06 FlashBIOS
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
The following changes have been made to the A04 to create A06 (A05 was not
released from Development):
* Adjusted USB Emulation support for special keys, and non-US keyboards.
* Added IDE UDMA support to speed up resume from Hibernate (when enabled).
* Added support for new Processors.
* Added support for additional models in the GX50 Series.
* Reduce POST time when no PS/2 keyboard or Mouse installed.
* Fixed issues with some USB devices causing a keyboard POST error with a
USB keyboard.
* Added two new diagnostic LED codes for better memory failure isolation.
No Memory Detected (ABCD=Grn, Yel, Yel, Yel)
Memory Configuration Failure (ABCD=Grn, Yel, Grn, Yel)
* Fixed false error on Floppy Drive when running Diags From Bootable Diags
CD without a Floppy Drive.
* Fixed possible CMOS corruption when adjusting system configuration
through Open Manage.
* Allow Num-pad Enter key on boot menu screen.
* Changed the AC Power Recovery to OFF as default.
* Added "Low Power Mode" option to System Setup.
* Fixed issue with UNKNOWN devices in System Setup for IDE devices.
If a failure occurs, now check the second IDE cable for devices.
* Fixed hang problem with Creative Audigy and large sound samples.
* Fixed issue when resuming from Hibernate with keyboard & mouse swapped.
了解详情released from Development):
* Adjusted USB Emulation support for special keys, and non-US keyboards.
* Added IDE UDMA support to speed up resume from Hibernate (when enabled).
* Added support for new Processors.
* Added support for additional models in the GX50 Series.
* Reduce POST time when no PS/2 keyboard or Mouse installed.
* Fixed issues with some USB devices causing a keyboard POST error with a
USB keyboard.
* Added two new diagnostic LED codes for better memory failure isolation.
No Memory Detected (ABCD=Grn, Yel, Yel, Yel)
Memory Configuration Failure (ABCD=Grn, Yel, Grn, Yel)
* Fixed false error on Floppy Drive when running Diags From Bootable Diags
CD without a Floppy Drive.
* Fixed possible CMOS corruption when adjusting system configuration
through Open Manage.
* Allow Num-pad Enter key on boot menu screen.
* Changed the AC Power Recovery to OFF as default.
* Added "Low Power Mode" option to System Setup.
* Fixed issue with UNKNOWN devices in System Setup for IDE devices.
If a failure occurs, now check the second IDE cable for devices.
* Fixed hang problem with Creative Audigy and large sound samples.
* Fixed issue when resuming from Hibernate with keyboard & mouse swapped.
版本
A06, A06
发布日期
20 8月 2002
下载类型
系统 BIOS
类别
BIOS
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改,或者提供不一定不适用于您的环境的新功能。
文件格式: 自解压zip内的一个或多个自解压磁盘映像
文件名: BGX50_06.exe
文件大小: 490 KB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
文件格式: 刷新BIOS可执行文件
文件名: GX50_A06.EXE
文件大小: 316.68 KB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
此文件格式包含BIOS可执行文件。要更新系统,请下载文件并将其保存到桌面或硬盘,然后运行该可执行文件。要更新BIOS,您的系统必须连接交流电源并具有至少10 %的电池电量。
为确保下载的完整性,请验证校验和值。
MD5:
不提供
SHA1:
不提供
SHA-256:
不提供
开始下载软件,即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
BIOS
OPTIPLEX 330 SYSTEM BIOS
OptiPlex System BIOS
Default Instructions for GX50_A06.EXE:
Non-Packaged
Creating the disk:
NOTE: This procedure requires one blank bootable, formatted 3.5-inch
floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Insert the blank bootable formatted 3.5-inch floppy disk.
7. Right-click the copy of the file, point to “Send To”, click “3 1/2
Floppy (a)”, and then skip to the section Flashing the BIOS below.
Flashing the BIOS:
NOTICE: Changing the system BIOS may result in unintended side affects,
such as incompatibility of the new BIOS with installed hardware. If
problems arise after a BIOS change, it may be necessary to return the
system to the original version of the BIOS.
1. If you are flashing the BIOS on a portable computer, be sure that
the AC adapter is plugged in and the computer is not operating on battery
power.
2. Ensure that the Flash BIOS disk is inserted into the floppy disk
drive.
3. Click the “Start” button, click “Shut Down”, click “Restart”, and
then click “Ok”.
The computer should restart and boot to the floppy disk.
NOTE: If the flash BIOS program does not start, and you see only an A:\
prompt, refer to the instructions from the Dell File Library page for the
BIOS update or to the Readme.txt instructions. Generally, you will type
the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS
version A10 on the OptiPlex™ series system.
A Press any key to continue prompt appears.
4. Press the “Enter” key.
A Press Y to replace old BIOS with new BIOS prompt appears.
5. Press the “Y” key.
NOTICE: Do not interrupt the system during this process. Please refrain
from pressing any keys on the keyboard, moving the mouse, or interrupting
power to the system. Failure to do so could result in damage to the system
BIOS.
When the computer has finished updating the BIOS, a Flash program
successful. Press any key to reboot prompt appears.
6. Remove the floppy disk and press the “Enter” key.
7. The computer will now restart with the new revision of the BIOS
installed.
The boot screen will indicate the BIOS version.
If you encounter device or resource errors after flashing the system BIOS,
enter the System Setup, clear the NVRAM and restore the system defaults.
For more information, refer to Dell Knowledge Base Articles:
· FA1035264 Title "How do I restore setup defaults on my Dell
OptiPlex system?"
· FA1035227 Title "How do I clear NVRAM on my Dell OptiPlex system?"
Floppy Disk Boot to Disk for BGX50_06.exe
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to