HLDS GCR-8481B HH 48X CD-ROM, v.JV2DE108, A00
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
DOS based firmware flash utility update for "HLDS GCR-8481B 48X CD ROM Drive".
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
This firmware fixes a Linux Mandrake 9.2 and HLDS 48X CD ROM drive incompatibility issue.
了解详情版本
JV2DE108, A00
发布日期
10 11月 2003
下载类型
固件
类别
可移动存储设备
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改,或者提供不一定不适用于您的环境的新功能。
GCR-8481B HH 48X CD-ROM
Hard Drive Floppy Disk Creation for BR69182.exe
1. Get 1 blank, formatted floppy disks.
2. Click the new icon on the desktop. The Self-Extractor window appears.
3. Click Setup. An MS-DOS window appears with a message indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. Once the files have been copied to the diskette a message appears prompting you to insert the second diskette.
7. Repeat steps 4 – 6 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.
Floppy Disk Setup.exe
1. Insert the first disk of the set or the only disk.
2. Click Start and then click Run.
3. In the Open textbox, type a:\setup.
4. Follow the on-screen instructions.
1. Get 1 blank, formatted floppy disks.
2. Click the new icon on the desktop. The Self-Extractor window appears.
3. Click Setup. An MS-DOS window appears with a message indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. Once the files have been copied to the diskette a message appears prompting you to insert the second diskette.
7. Repeat steps 4 – 6 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.
Floppy Disk Setup.exe
1. Insert the first disk of the set or the only disk.
2. Click Start and then click Run.
3. In the Open textbox, type a:\setup.
4. Follow the on-screen instructions.