Dell PowerVault NX3300 Identity Module
需要重新启动 已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
For motherboard replacement of PowerVault NX3300 only!
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Fixes: N/A
Enhancements: N/A
了解详情Enhancements: N/A
版本
1.00, A00
发布日期
22 8月 2012
下载类型
应用程序
类别
生命周期控制器 - 传统
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改,或者提供不一定不适用于您的环境的新功能。
文件格式: 应用程序
文件名: RYKFY_NX3300CustBSU_1_0.exe
文件大小: 202.15 KB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
应用程序
为确保下载的完整性,请验证校验和值。
MD5:
8218538d5838107006c3fef30a8c8b3a
SHA1:
7879265c6a9a0c65ad6dfda7bfae22f9c436aa5a
SHA-256:
cc465fa0b4b1fb83bfcc63a3da45f2cfc60f9005598fa575964f1ebd040ceeae
开始下载软件,即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
ID MODULE
********* install instructions for "Customer Board Service Utility Identity Module" *****
1) Ensure that the IdentityModule's exe file has 'BSU' in its file name.
Caution: The exe file name without 'BSU' ( Board Service Utility) will fail to update if upload is attempted after motherboard replacement.
error message: RAC0142: The firmware image file is not valid for iDRAC firmware update.
2) Extract out the .pm file from the zip pack exe in this release.
3) Login into iDRAC GUI.
4) Navigate to 'iDRAC firmware update' link located on left pane.
5) Upload the .pm file. Wait for iDRAC reboot to complete.
6) Reboot the system.
7) Verify the Branding changes ( on iDrac GUI and System) requested in this .pm file.
Reboot will be required
1) Ensure that the IdentityModule's exe file has 'BSU' in its file name.
Caution: The exe file name without 'BSU' ( Board Service Utility) will fail to update if upload is attempted after motherboard replacement.
error message: RAC0142: The firmware image file is not valid for iDRAC firmware update.
2) Extract out the .pm file from the zip pack exe in this release.
3) Login into iDRAC GUI.
4) Navigate to 'iDRAC firmware update' link located on left pane.
5) Upload the .pm file. Wait for iDRAC reboot to complete.
6) Reboot the system.
7) Verify the Branding changes ( on iDrac GUI and System) requested in this .pm file.
Reboot will be required