PowerConnect, M8024-k, v5.0.0.4, A08
需要重新启动 已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题,您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈,请填写页面底部的表单。
This firmware is for the M8024-K version of PowerConnect switch and has new features and bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
推荐
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Fixes and Enhancement:
Fixes
- OpenManage UI does not accept blank space character for port description.
- "show spanning-tree detail" counters are non-zero for inactive interfaces.
- Unable to remove 0.0.0.0 as default gateway on OOB interface using the web.
- When connecting via SSH, the user is not prompted to acknowledge the MOTD
- "encapsulation" command is unavailable in interface range mode
- M8024-k OpenManage Web UI stack view display
- "spanning-tree transmit hold-count" command's value is not reflected in show command
- Inconsistent behavior in single and range interface mode of "spanning-tree port
- CLI command "no passwords strength exclude-keyword" requires
- Inline help for "spanning-tree loopguard" is incorrect.
- Some of the options of "show ip pim" command are not available in user EXEC mode.
- Configuration command "logging" accepts more than 63 characters.
- dot1dTpPortMaxInfo is displaying maximum frame size that includes MAC header.
- If a user attempts to create a certificate request with information that is not identical to the key generated, the user is not given an error/ informative response letting them know there is a conflict between their key and their request.
- OIDagentInventorySupportedUnitExpected CodeVer provides incorrect display string 1.0.176.0
- 1. Changes are not applied to the correct interfaces on the pages "System->sFlow->Sampler Configuration" "System->sFlow->Poll Configuration" 2. Incorrect error message is displayed when not configured Receiver index is applied to interface on "System->sFlow->Poll Configuration" page.
- "show ip route configured ...longer-prefixes" reports that default gateway is not configured, which is incorrect.
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- "ipv6 pim join-prune interval" command does not work
- Macro input string does not accept more than 20 characters
- startup-config failed error message is displayed when finishing the Dell Easy Setup Wizard
- In stacking environment, "show system temperature" command output is corrupted
- Error message for port enable / disable on IE on 8024F combo ports
- Alignment issues in the output of "show voice vlan interface" command
- CLI command "show ip igmp snooping" output is truncated.
- vrrp ip command accepts invalid IP addresses
- CLI command "isdp enable" does not work for a range of ports
- "show interface Priority-Flow-Control" command output is not formatted correctly
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- Port channel goes down during master failover.
- switches rebooting - possible crash dump w/ emWeb
- general mode vlan does not show up after a reload, it shows up in access vlan
- SNMP OIDs 1.3.6.1.4.1.674.10895.3000.1.2.110.7.x causing switch crash
- Stack ARP Problem
- Stack member units port display is missing in web GUI.
- No response to ICMP with jumbo (ping)
- Ports connected to Intel X520 NIC do not return online after reboot.
- switch reboots randomly.
Enhancements
- 802.1Qaz (ETS) on 8100 series
- Added Native EEE Support for the PC8100 10GBaseT Ports
- Support for 40 Gig (QSFP+) interfaces
- Support for Bootcode upgrade from pre-4.x image to 5.x image without manual system reset.
- Local Preference for LAG
- Full Private VLAN
- CLI output filtering
- Routing Improvements for OSPF
- UDLD
- Administrative Profiles
- AAA Authorization
- TACACS+ Accounting
- Stacking over QSFP+ ports
- QSFP+ diagnostics
- sFlow Support on Port Channels
了解详情Fixes
- OpenManage UI does not accept blank space character for port description.
- "show spanning-tree detail" counters are non-zero for inactive interfaces.
- Unable to remove 0.0.0.0 as default gateway on OOB interface using the web.
- When connecting via SSH, the user is not prompted to acknowledge the MOTD
- "encapsulation" command is unavailable in interface range mode
- M8024-k OpenManage Web UI stack view display
- "spanning-tree transmit hold-count" command's value is not reflected in show command
- Inconsistent behavior in single and range interface mode of "spanning-tree port
- CLI command "no passwords strength exclude-keyword" requires
- Inline help for "spanning-tree loopguard" is incorrect.
- Some of the options of "show ip pim" command are not available in user EXEC mode.
- Configuration command "logging
- dot1dTpPortMaxInfo is displaying maximum frame size that includes MAC header.
- If a user attempts to create a certificate request with information that is not identical to the key generated, the user is not given an error/ informative response letting them know there is a conflict between their key and their request.
- OIDagentInventorySupportedUnitExpected CodeVer provides incorrect display string 1.0.176.0
- 1. Changes are not applied to the correct interfaces on the pages "System->sFlow->Sampler Configuration" "System->sFlow->Poll Configuration" 2. Incorrect error message is displayed when not configured Receiver index is applied to interface on "System->sFlow->Poll Configuration" page.
- "show ip route configured ...longer-prefixes" reports that default gateway is not configured, which is incorrect.
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- "ipv6 pim join-prune interval" command does not work
- Macro input string does not accept more than 20 characters
- startup-config failed error message is displayed when finishing the Dell Easy Setup Wizard
- In stacking environment, "show system temperature" command output is corrupted
- Error message for port enable / disable on IE on 8024F combo ports
- Alignment issues in the output of "show voice vlan interface" command
- CLI command "show ip igmp snooping" output is truncated.
- vrrp ip command accepts invalid IP addresses
- CLI command "isdp enable" does not work for a range of ports
- "show interface Priority-Flow-Control" command output is not formatted correctly
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- Port channel goes down during master failover.
- switches rebooting - possible crash dump w/ emWeb
- general mode vlan does not show up after a reload, it shows up in access vlan
- SNMP OIDs 1.3.6.1.4.1.674.10895.3000.1.2.110.7.x causing switch crash
- Stack ARP Problem
- Stack member units port display is missing in web GUI.
- No response to ICMP with jumbo (ping)
- Ports connected to Intel X520 NIC do not return online after reboot.
- switch reboots randomly.
Enhancements
- 802.1Qaz (ETS) on 8100 series
- Added Native EEE Support for the PC8100 10GBaseT Ports
- Support for 40 Gig (QSFP+) interfaces
- Support for Bootcode upgrade from pre-4.x image to 5.x image without manual system reset.
- Local Preference for LAG
- Full Private VLAN
- CLI output filtering
- Routing Improvements for OSPF
- UDLD
- Administrative Profiles
- AAA Authorization
- TACACS+ Accounting
- Stacking over QSFP+ ports
- QSFP+ diagnostics
- sFlow Support on Port Channels
版本
v5.0.0.4, A08
发布日期
29 8月 2012
下载类型
固件
类别
有线网卡/无线网卡/蓝牙
重要性
推荐Dell Technologies 建议在下一个计划的更新周期期间应用此更新。更新包含用于维护整体系统运行状况的更改。它可确保系统软件保持最新状态并与其他系统模块(固件、BIOS、驱动程序和软件)兼容,并且可能包括其他新功能。
文件格式: 将文件直接解压到本地磁盘
文件名: PCM8024kv5.0.0.4a08.zip
文件大小: 13.02 MB
这是一个大文件。根据您的连接速度,可能需要一些时间来下载。
格式说明:
此文件格式的一个文件存档,可以解压到硬盘上的某个目录中。然后可以从该目录完成安装。
为确保下载的完整性,请验证校验和值。
MD5:
82d872fa083700ac8b8b2926e4035c8b
SHA1:
f49187d2d940705d64d4cdf6c43b01be34b177c8
SHA-256:
0339219fe1fde9805ab19f787af51fa4a0361666bc9e5c80b6588604ffad4462
开始下载软件,即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"
PowerConnect M8024-K
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"
Reboot will be required
Reboot will be required