Dell 2161DS数字交换机, v.3.1.0.0，1.3 (A03-00)
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
2161DS KVM Firmware Update (1.3 / A03-00) for LDAP Support
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。 您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
Features and Enhancements:
- Active Directory support for digital KVMs through LDAP
了解详情- Active Directory support for digital KVMs through LDAP
版本
3.1.0.0, 1.3 (A03-00)
发布日期
12 9月 2006
下载类型
固件
类别
设备固件
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改，或者提供不一定不适用于您的环境的新功能。
重要信息
This firmware is meant for use only on legacy 2161DS systems. It is not compatible with newer 2161DS-2 or 4161DS systems. For LDAP support on newer 2161DS-2 or 4161DS systems, please use the appropriate firmware available at support.dell.com.
受支持的操作系统
Red Hat® Enterprise Linux 2.1
Red Hat® Enterprise Linux 3
Red Hat® Linux 7.3
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Novell Netware
Windows Server 2003
Windows NT 4.0
Windows 2000
安装说明
Instructions for R132109.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Upgrading Firmware Using a Serial Console
To upload a new FLASH file to the 2161DS Console Switch:
1. Connect a terminal or PC running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the 2161DS Console Switch using the supplied serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow
control.
2. If the 2161DS Console Switch is not powered up, turn it on now. The Power indicator on the front of the unit will blink for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the ENTER key to access the main menu.
3. You will see the Terminal Applications menu with seven options. Select option 2, Firmware Management.
4. Select option 1, FLASH Download.
5. Type the IP address of your TFTP server and press the ENTER key.
6. Type the name of the appropriate languaged FLASH file and press the ENTER key.
7. Confirm the TFTP download by typing a y or yes and pressing the ENTER key.
8. The 2161DS Console Switch will verify that the file you downloaded is valid.
9. The 2161DS Console Switch will begin the FLASH upgrade process. On-screen indicators will display the upgrade progress. When the upload is complete, the 2161DS Console Switch will reset and upgrade the internal subsystems.
10. Once the upgrade is complete, a verification message will appear on screen.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Upgrading Firmware Using a Serial Console
To upload a new FLASH file to the 2161DS Console Switch:
1. Connect a terminal or PC running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the 2161DS Console Switch using the supplied serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow
control.
2. If the 2161DS Console Switch is not powered up, turn it on now. The Power indicator on the front of the unit will blink for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the ENTER key to access the main menu.
3. You will see the Terminal Applications menu with seven options. Select option 2, Firmware Management.
4. Select option 1, FLASH Download.
5. Type the IP address of your TFTP server and press the ENTER key.
6. Type the name of the appropriate languaged FLASH file and press the ENTER key.
7. Confirm the TFTP download by typing a y or yes and pressing the ENTER key.
8. The 2161DS Console Switch will verify that the file you downloaded is valid.
9. The 2161DS Console Switch will begin the FLASH upgrade process. On-screen indicators will display the upgrade progress. When the upload is complete, the 2161DS Console Switch will reset and upgrade the internal subsystems.
10. Once the upgrade is complete, a verification message will appear on screen.